An open festive circle for thoughtful seasonal making
A Christmas wreath ornament SVG.
A little circle of welcome.
Evergreen Loop is an original Christmas wreath ornament SVG for laser cutting and engraving. The design is a circular open wreath with a wide continuous ring and integral top hanging tab. The ZIP download includes one scalable SVG and an English preparation guide. Original size: 100 × 120 mm overall, including the integrated hanging tab, with a 5 mm hanging hole. The central opening is 60 mm in diameter at the original size.
An open festive circle.
Details around its edge.
Evergreen Loop takes the welcoming form of a Christmas wreath into a compact hanging ornament. Its open centre lets a branch, ribbon or background become part of the display, while engraved decoration gives the surrounding band its character. Choose your own approved material and finish to make a quiet seasonal keepsake.
The wreath band and integrated hanging tab form one connected flat ornament around a real central opening. Decorative marks are engraved on the band. The centre is cut away; it is not a solid circular plaque or an engraved imitation of an opening.
The images illustrate a possible finished appearance. Physical ornaments, stock, cord and styling props are not included.
A connected shape.
A clear file to prepare.
| Included files | One scalable SVG vector file and one English README, packaged in a ZIP archive |
|---|---|
| Original dimensions | 100 × 120 mm overall, including the integrated hanging tab |
| Hanging hole | 5 mm diameter at the original size |
| Central opening | 60 mm diameter at the original size; the centre is cut away |
| Cut operations | 3 red (#FF0000), centered 0.025 mm closed contours: outer silhouette, central opening and hanging hole |
| Engrave operations | 12 black (#000000) filled paths: four flowing leaf marks, five berries, one ribbon knot and two ribbon-fold marks |
| File construction | Separate CUT and ENGRAVE groups; no fonts, linked images or embedded raster artwork |
| Construction | One connected flat wreath band around a cut central opening; black details are engraved on the band |
| Product type | Digital download only; no finished ornament, cord, sheet stock or tools included |
| Product code | VD-EL-414 |
Confirm. Assign.
Test your own material.
-
Check the complete design
Extract the ZIP, import the SVG and verify its 100 × 120 mm overall dimensions, 5 mm hanging hole and 60 mm central opening before placing the artwork.
-
Separate the operations
Assign black filled artwork to engraving and the three red outlines to cutting. Engrave first, cut the hanging hole, then the central opening, and cut the outside silhouette last.
-
Make a material sample
Inspect the wreath band, central opening, engraved decoration and hanging tab after import. Confirm the stated opening diameters and keep the ring at one proportional scale. Make a material sample to check the band and cord clearance.
This design has not been physically test-cut or test-engraved. No universal thickness, power, speed or pass count is supplied. Results depend on software, material, kerf and machine setup.
Your Christmas project.
The practical details.
What files will I receive?
You receive one original Christmas wreath ornament SVG and an English README. The ZIP contains evergreen-loop-wreath.svg and README.txt. Extract the files before importing the SVG into supported software.
Is the centre a real cut opening?
Yes. The central opening is 60 mm in diameter at the original size. The SVG has three closed cutting contours: the hanging hole, central opening and outside silhouette. Engrave the black details first, cut both internal openings, then cut the outer contour last.
Is a physical ornament included?
No. You receive a digital SVG and English guide. You provide approved material, cord, equipment and any finish. Display images are illustrative; styling props are not supplied.
Can I resize this Christmas wreath ornament SVG?
Yes. Scale the complete design proportionally. The hanging hole, central opening, engraved marks and narrow connections also change size. Check the revised geometry and cord clearance, and make a new material sample.
How do I prepare the file for Glowforge, xTool or Epilog?
Glowforge: Upload the SVG in the Glowforge App. Check the dimensions and assign black filled artwork to Engrave and the red outlines to Cut. Review the job preview before processing.
xTool Studio/XCS: Import the SVG into software supported by your model. Studio’s SVG import DPI setting can affect scale. Verify the 100 × 120 mm outline, 5 mm hanging hole and 60 mm central opening, then assign engraving and cutting operations.
Epilog: Open the SVG in suitable vector software and use the driver or Dashboard workflow supported by your model. In Illustrator, retain centered 0.025 mm vector strokes. For CorelDRAW, follow your exact model’s hairline guidance. Review engraving and vector-cut separation in the job preview.
Other CO₂/diode systems: Where the controller is supported by LightBurn, import the SVG, assign red contours to Line/Cut and black shapes to Fill/Engrave, and check Preview. A laser source type alone does not establish software, controller or material compatibility.
Which materials should I choose?
Use laser-approved stock suited to your exact equipment and wavelength. Acrylic suitability depends on its colour, composition and laser source; clear acrylic and some colours are unsuitable for many diode workflows. Consult Glowforge material guidance or your manufacturer’s own material list. Never process PVC, vinyl, unknown coatings or prohibited stock. Follow ventilation and supervision instructions and test your chosen material.
Can I sell physical ornaments I make?
Yes. Personal projects and sales of finished physical items you make are permitted. Do not resell, share or redistribute the digital files or modified digital versions. See the README for usage terms.