A little seasonal comfort for your Christmas tree
A Christmas mug ornament SVG.
A little seasonal comfort.
Cocoa & Cheer is an original Christmas mug ornament SVG for laser cutting and engraving. The design is a cocoa-mug silhouette with a broad cup body, solid handle area and integral top hanging tab. The ZIP download includes one scalable SVG and an English preparation guide. Original size: 100 × 120 mm overall, including the integrated hanging tab, with a 5 mm hanging hole.
A cosy Christmas cup.
A small moment to keep.
Cocoa & Cheer takes the comforting shape of a festive mug into a flat hanging ornament. Its generous cup form adds a welcoming detail to Christmas branches, wrapped presents or a cocoa-themed seasonal display. The engraved interior marks give the solid face its definition while leaving room for the finish and material you prefer.
The mug motif and integrated hanging tab form one connected flat ornament. The handle interior is a black filled engraving mark on solid material, not a cut opening. Decorative details are engraved, with no hollow cup, separate handle or assembly.
The images illustrate a possible finished appearance. Physical ornaments, stock, cord and styling props are not included.
A connected shape.
A clear file to prepare.
| Included files | One scalable SVG vector file and one English README, packaged in a ZIP archive |
|---|---|
| Original dimensions | 100 × 120 mm overall, including the integrated hanging tab |
| Hanging hole | 5 mm diameter at the original size |
| Cut operations | 2 red (#FF0000), centered 0.025 mm closed contours: outer silhouette and hanging hole |
| Engrave operations | 8 black (#000000) filled paths: one rim band, two marshmallow marks, one handle inlay, one heart, one lower band and two small four-point spark marks |
| File construction | Separate CUT and ENGRAVE groups; no fonts, linked images or embedded raster artwork |
| Construction | One connected flat ornament; interior artwork is engraved on its solid face |
| Product type | Digital download only; no finished ornament, cord, sheet stock or tools included |
| Product code | VD-CC-M |
Confirm. Assign.
Test your own material.
-
Check the complete design
Extract the ZIP, import the SVG and verify its 100 × 120 mm overall dimensions, 5 mm hanging hole before placing the artwork.
-
Separate the operations
Assign black filled artwork to engraving and the two red outlines to cutting. Engrave first, then cut the hanging hole before the outside silhouette.
-
Make a material sample
Inspect the cup outline, handle connection, engraved handle interior and hanging tab after import. Keep the handle mark assigned to engraving, preserve the proportions and make a sample using approved stock.
This design has not been physically test-cut or test-engraved. No universal thickness, power, speed or pass count is supplied. Results depend on software, material, kerf and machine setup.
Your Christmas project.
The practical details.
What files will I receive?
You receive one original Christmas mug ornament SVG and an English README. The ZIP contains cocoa-cheer-mug.svg and README.txt. Extract the files before importing the SVG into supported software.
Is the mug handle a real cut opening?
No. The handle interior is engraved as a black filled shape on solid material. The only cut contours are the outside silhouette and the 5 mm hanging hole at the original size. This is a flat decorative mug motif, not a drinking vessel.
Is a physical ornament included?
No. You receive a digital SVG and English guide. You provide approved material, cord, equipment and any finish. Display images are illustrative; styling props are not supplied.
Can I resize this Christmas mug ornament SVG?
Yes. Scale the complete design proportionally. The hole, engraved marks and narrow connections also change size. Check the revised geometry and cord clearance, and make a new material sample.
How do I prepare the file for Glowforge, xTool or Epilog?
Glowforge: Upload the SVG in the Glowforge App. Check the dimensions and assign black filled artwork to Engrave and the red outlines to Cut. Review the job preview before processing.
xTool Studio/XCS: Import the SVG into software supported by your model. Studio’s SVG import DPI setting can affect scale. Verify the 100 × 120 mm outline, 5 mm hanging hole, then assign engraving and cutting operations.
Epilog: Open the SVG in suitable vector software and use the driver or Dashboard workflow supported by your model. In Illustrator, retain centered 0.025 mm vector strokes. For CorelDRAW, follow your exact model’s hairline guidance. Review engraving and vector-cut separation in the job preview.
Other CO₂/diode systems: Where the controller is supported by LightBurn, import the SVG, assign red contours to Line/Cut and black shapes to Fill/Engrave, and check Preview. A laser source type alone does not establish software, controller or material compatibility.
Which materials should I choose?
Use laser-approved stock suited to your exact equipment and wavelength. Acrylic suitability depends on its colour, composition and laser source; clear acrylic and some colours are unsuitable for many diode workflows. Consult Glowforge material guidance or your manufacturer’s own material list. Never process PVC, vinyl, unknown coatings or prohibited stock. Follow ventilation and supervision instructions and test your chosen material.
Can I sell physical ornaments I make?
Yes. Personal projects and sales of finished physical items you make are permitted. Do not resell, share or redistribute the digital files or modified digital versions. See the README for usage terms.