A familiar festive character for your Christmas branches
A gingerbread man ornament SVG.
A little festive sweetness.
Sugarstep is an original gingerbread man ornament SVG for laser cutting and engraving. The design is a gingerbread-figure silhouette with a rounded head, broad arms and legs and an integral top hanging tab. The ZIP download includes one scalable SVG and an English preparation guide. Original size: 100 × 120 mm overall, including the integrated hanging tab, with a 5 mm hanging hole.
A cheerful cookie shape.
A keepsake with character.
Sugarstep brings the familiar shape of a gingerbread character to a simple hanging ornament. Its rounded figure adds a playful detail to Christmas branches, a seasonal garland or a carefully wrapped gift. Engraved decoration defines the solid face while your own approved material and finish give the finished piece its character.
The gingerbread figure and integrated hanging tab form one connected flat piece. Facial and decorative marks are engraved on solid material, with no separate icing pieces, layers or decorative inserts to attach.
The images illustrate a possible finished appearance. Physical ornaments, stock, cord and styling props are not included.
A connected shape.
A clear file to prepare.
| Included files | One scalable SVG vector file and one English README, packaged in a ZIP archive |
|---|---|
| Original dimensions | 100 × 120 mm overall, including the integrated hanging tab |
| Hanging hole | 5 mm diameter at the original size |
| Cut operations | 2 red (#FF0000), centered 0.025 mm closed contours: outer silhouette and hanging hole |
| Engrave operations | 12 black (#000000) filled paths: two eyes, one curved smile, two bow folds, one bow knot, two round buttons, two arm-icing marks and two leg-icing marks |
| File construction | Separate CUT and ENGRAVE groups; no fonts, linked images or embedded raster artwork |
| Construction | One connected flat ornament; interior artwork is engraved on its solid face |
| Product type | Digital download only; no finished ornament, cord, sheet stock or tools included |
| Product code | VD-SG-M |
Confirm. Assign.
Test your own material.
-
Check the complete design
Extract the ZIP, import the SVG and verify its 100 × 120 mm overall dimensions and 5 mm hanging hole before placing the artwork.
-
Separate the operations
Assign black filled artwork to engraving and the two red outlines to cutting. Engrave first, then cut the hanging hole before the outside silhouette.
-
Make a material sample
Inspect the rounded head, arms, leg connections and hanging tab after import. Keep all engraved marks at the same proportional scale as the outline and make a sample using your chosen approved stock.
This design has not been physically test-cut or test-engraved. No universal thickness, power, speed or pass count is supplied. Results depend on software, material, kerf and machine setup.
Your Christmas project.
The practical details.
What files will I receive?
You receive one original gingerbread man ornament SVG and an English README. The ZIP contains sugarstep-gingerbread-man.svg and README.txt. Extract the files before importing the SVG into supported software.
Do I assemble separate icing or character pieces?
No. Sugarstep uses one connected silhouette and engraved interior decoration. Only the outside contour and the hanging hole are cut. There are no separate icing shapes or character parts to assemble.
Is a physical ornament included?
No. You receive a digital SVG and English guide. You provide approved material, cord, equipment and any finish. Display images are illustrative; styling props are not supplied.
Can I resize this gingerbread man ornament SVG?
Yes. Scale the complete design proportionally. The hole, engraved marks and narrow connections also change size. Check the revised geometry and cord clearance, and make a new material sample.
How do I prepare the file for Glowforge, xTool or Epilog?
Glowforge: Upload the SVG in the Glowforge App. Check the dimensions and assign black filled artwork to Engrave and the red outlines to Cut. Review the job preview before processing.
xTool Studio/XCS: Import the SVG into software supported by your model. Studio’s SVG import DPI setting can affect scale. Verify the 100 × 120 mm outline, 5 mm hanging hole, then assign engraving and cutting operations.
Epilog: Open the SVG in suitable vector software and use the driver or Dashboard workflow supported by your model. In Illustrator, retain centered 0.025 mm vector strokes. For CorelDRAW, follow your exact model’s hairline guidance. Review engraving and vector-cut separation in the job preview.
Other CO₂/diode systems: Where the controller is supported by LightBurn, import the SVG, assign red contours to Line/Cut and black shapes to Fill/Engrave, and check Preview. A laser source type alone does not establish software, controller or material compatibility.
Which materials should I choose?
Use laser-approved stock suited to your exact equipment and wavelength. Acrylic suitability depends on its colour, composition and laser source; clear acrylic and some colours are unsuitable for many diode workflows. Consult Glowforge material guidance or your manufacturer’s own material list. Never process PVC, vinyl, unknown coatings or prohibited stock. Follow ventilation and supervision instructions and test your chosen material.
Can I sell physical ornaments I make?
Yes. Personal projects and sales of finished physical items you make are permitted. Do not resell, share or redistribute the digital files or modified digital versions. See the README for usage terms.