A summer detail. A little gift to share.
Strawberry gift box SVG.
A small taste of summer.
Berry Picnic is an original strawberry gift box SVG for flexible cardstock, with an English preparation and assembly guide and an annotated fold map. Separate base and lid nets form a compact square gift box with three open lid windows. Digital download only.
A berry-shaped window.
A simple square beneath.
Berry Picnic brings a seasonal silhouette to a compact square gift box. A broad strawberry window with a fused three-point crown sits on the removable lid, accompanied by two round apertures. There are no seed or vein details to attach. Choose your own cardstock for a picnic-table gift, a summer gathering or a small handmade thank-you.
The strawberry and two round apertures are three open lid windows. Two separate cross-shaped nets form a solid-bottom base and removable lid, with four corner glue tabs on each piece. The lid top panel is wider than the base floor panel, but finished clearance depends on the actual stock, folds and adhesive.
The images illustrate a possible finish and setting. Digital files only; finished boxes, cardstock, adhesive, ribbon, contents, tools and styling props are not included.
Two separate nets.
One small, considered box.
| Download | ZIP containing exactly three files: one combined SVG, an English README and one fold-map PNG |
|---|---|
| Nominal size | Nominal base: 60 × 60 × 25 mm. The lid has a 62 × 62 mm top and 12 mm walls. The 2 mm panel difference means a nominal 1 mm per side before stock, fold and adhesive allowances; it does not establish measured internal clearance or fit. |
| SVG page | 210 × 125 mm; allow additional machine-required edge and fixture space |
| Artwork bounds | 202 × 110 mm at path centerlines; confirm this after import |
| Separate nets | Base 110 × 110 mm; lid 86 × 86 mm |
| Operations | 5 closed red CUT paths; 16 open blue SCORE paths; no engraving. Both groups have no fill and centered 0.025 mm strokes. |
| Closure | A removable lid seats over the base with no locking tabs or latch. Each piece has four inside corner glue tabs. Dry-fit a prototype in your actual stock and check lid overlap without forcing it. |
| Material | Flexible uncoated cardstock approved for your exact machine and laser wavelength; not rigid wood, plywood or acrylic construction |
| File construction | Path-based vectors without live fonts, raster content, linked images or SVG transforms; no machine preset supplied |
| Product code | VD-BP-SB |
Raise the walls.
Finish with a fitting lid.
-
Prepare the vectors
Extract the ZIP, import the SVG at 100% and verify the artwork and panel dimensions. Assign red to through-cut and blue to a tested shallow surface score. Where supported, score first, cut inner apertures next and cut outer boundaries last. If a suitable shallow score is unavailable, disable the entire blue group and hand-crease from the fold map. Never through-cut the folds.
-
Build the base and lid
Pre-crease the eight folds on each piece. Raise the four base walls and turn each glue tab inside the adjacent wall. Put cardstock-compatible adhesive on the tab’s outward face, keep the tray square and let it cure. Repeat with the lid, keeping adhesive away from the windows.
-
Check the fit
Dry-fit the removable lid over the base without forcing it. Stock thickness, crease radius and adhesive consume the nominal panel difference. Keep the two nets at the same scale. If allowance needs editing, make a fresh prototype before making a batch.
This design has not been physically test-cut, scored or assembled. Stock, creasing, adhesive and closure materials affect fit and strength. Make a complete prototype before making a batch; no universal machine settings or finished capacity are supplied.
Before you fill it.
A few practical answers.
What files will I receive?
The ZIP contains exactly three files: berry-picnic-strawberry-square-gift-box.svg, README.txt and fold-map.png. The SVG is one combined machining layout with separate red CUT and blue SCORE groups. No cut-only or score-only alternative SVG is supplied. The PNG is an annotated assembly reference, not a machining image.
Is this a physical box, or a digital download?
This is a digital download only. The pictures illustrate a possible finished appearance and setting. No physical box, cardstock, adhesive, ribbon, inner wrap, contents, props, tools or machine settings are included.
What size is the box, and how does it close?
Nominal base: 60 × 60 × 25 mm. The lid has a 62 × 62 mm top and 12 mm walls. The 2 mm panel difference means a nominal 1 mm per side before stock, fold and adhesive allowances; it does not establish measured internal clearance or fit. A removable lid seats over the base with no locking tabs or latch. Each piece has four inside corner glue tabs. Dry-fit a prototype in your actual stock and check lid overlap without forcing it.
Can I resize the design?
Keep every cut and fold path aligned and scale all geometry proportionally. Resizing changes windows, glue reach, folds and material allowances. Do not crop or break a connected net. Confirm the new physical dimensions and make a complete prototype in your chosen stock. Keep the base and lid at the same scale; the nominal lid difference is not guaranteed finished clearance.
How do I prepare it for Glowforge, xTool, Epilog or another laser?
Glowforge: Upload the SVG in the app supported by your exact model. Verify size; assign red to Cut and blue to a tested shallow Score, or Ignore blue for hand creasing.
xTool Studio / XCS: Import as SVG vectors. Studio import DPI and XCS automatic resizing can affect dimensions. Verify the net and panels. Assign red Cut and blue Score or disabled output; excess power or slow speed can still cut folds through.
Epilog: Use vector software and the driver or Dashboard supported by your model. For the documented Illustrator route, retain centered 0.025 mm strokes. Give red and blue separate tested through-cut and light-score settings using the supported mapping workflow.
Other CO₂/diode equipment: Confirm software and controller support. LightBurn imports SVG on supported systems; use separate Line layers for cutting and shallow scoring, or turn blue output off. Do not use Fill for folds. Confirm the preview, ordering, usable bed and approved stock for the exact machine and wavelength. SVG import alone does not establish material compatibility.
Which cardstock and settings should I choose?
Use flexible uncoated cardstock confirmed suitable by its manufacturer and your exact machine instructions. No universal gsm, thickness, power, speed or pass count is supplied. Check coatings and keep adhesive application until after laser processing. Test a scrap, then a full prototype. This design has not been physically test-cut, scored or assembled. The strawberry theme does not make this a food-contact container. Keep food separately wrapped in suitable packaging. Small loose contents can pass through the lid windows; use a separate inner wrap if needed. This is decorative light-gift packaging; no shipping, moisture-barrier or load-rated performance has been established.
May I sell finished boxes made with this design?
Yes. Personal projects and sales of finished physical items you make are permitted. Do not resell, share, give away, sublicense or redistribute the SVG, guide, fold map, modified digital files or digital parts, including in another digital bundle. The included English README contains the usage terms.