Treat-inspired shapes. A cheerful paper parade.
Ice cream paper garland SVG.
A little sweetness to hang.
Scoop Parade is an original ice cream paper garland SVG for 3 flat paper pieces: one single-scoop ice-cream cone, one popsicle and one footed sundae. Three SVG files supply the cut contours, with an English preparation guide and reference images. Use your own paper and cord, choose the spacing and assemble the display by hand. No fixed overall length is specified.
A treat-inspired paper study.
A display made your way.
Scoop Parade brings an ice cream-inspired theme to a flexible paper garland. Choose colours for the supplied flat motifs, then set the arrangement and spacing with your own cord. The digital templates provide the shapes for a display you assemble by hand, for an occasion or a creative paper project.
Three distinct flat dessert silhouettes: a single-scoop ice-cream cone with five diamond waffle apertures; a popsicle with two long rounded slots and an integral stick; and a footed sundae with three scoop lobes, an integral cherry and three oval bowl apertures. Each piece has two round hanging holes. All features remain connected paper, not layered or folded components.
The images illustrate a possible finish and setting. This is a digital download; physical cards or decorations, paper, adhesive, envelopes, tools, suspension supplies and styling props are not included.
Cut paper motifs.
A display you compose.
| Included files | Three SVG cutting files, one English README and 2 reference PNGs in one ZIP archive |
|---|---|
| Pieces in one set | 3 separate flat pieces: one single-scoop ice-cream cone, one popsicle and one footed sundae |
| Actual piece sizes (W × H) | Ice cream cone: 70 × 104 mm; Popsicle: 54 × 96 mm; Sundae: 80 × 92 mm; nominal before kerf and handling |
| SVG document pages | 01-ice-cream-cone-cut.svg: 82 × 116 mm; 02-popsicle-cut.svg: 66 × 108 mm; 03-sundae-cut.svg: 92 × 104 mm; 6 mm page margins |
| Cut operations | 19 red (#FF0000) closed cut contours per complete set; centered 0.025 mm strokes, no fill |
| Hanging and suspension holes | Six 3 mm nominal hanging holes per set, two in each motif |
| Construction | Flat cut silhouettes; no folded sculpture, interlocking joinery, scoring or engraving |
| File use | Cut each SVG once for one three-piece set, or duplicate selected files to repeat cones, popsicles or sundaes along a longer garland. Each dessert silhouette is one connected flat paper shape, rather than a layered or folded component. |
| Design details | Three distinct flat dessert silhouettes: a single-scoop ice-cream cone with five diamond waffle apertures; a popsicle with two long rounded slots and an integral stick; and a footed sundae with three scoop lobes, an integral cherry and three oval bowl apertures. Each piece has two round hanging holes. All features remain connected paper, not layered or folded components. |
| Arrangement and size | Cone, popsicle and sundae motifs can be repeated and spaced along a cord. Overall length, cord lengths, spacing and supports are chosen by the maker |
| Material planning | Plain, uncoated paper or cardstock approved for the exact machine and wavelength, with enough strength for the intended hanging display |
| Supplies to provide | Paper, suitable thin cord, tools and your own display support; none is supplied |
| Product type | Digital download only; physical decorations, paper, cord, adhesive, hardware and styling props are not included |
| Product code | VD-SI-PG |
Prepare the pieces.
Set your own paper rhythm.
-
Check the files and dimensions
Cut each SVG once for one three-piece set, or duplicate selected files to repeat cones, popsicles or sundaes along a longer garland. Each dessert silhouette is one connected flat paper shape, rather than a layered or folded component. Check each actual piece size after import: Ice cream cone: 70 × 104 mm; Popsicle: 54 × 96 mm; Sundae: 80 × 92 mm. The document pages include margins. Preserve the common scale if you want the illustrated proportions.
-
Cut and release each piece
Map all 19 red contours to vector Cut, then preview the job. There are no score or engraving operations. Cut internal openings before releasing outer silhouettes where your software permits. Test the approved stock first and remove waste carefully without pulling narrow sections.
-
Arrange, tie and inspect
Cut one of each dessert motif, or duplicate files to repeat cones, popsicles or sundaes. Thread a separate maker-supplied cord through the two round hanging holes in each piece. Adjust spacing and secure the ends for your chosen display. No fixed finished garland length is specified. Dry-arrange the complete display before installation. Select cord that passes through the holes without forcing or tearing them, and inspect your own knots, hole margins and display support.
This design has not been physically test-cut, assembled, strength-tested or mounting-tested. Paper, grain direction, kerf, cord tension and display support affect the result. Make a complete prototype and inspect your own suspension arrangement before gifting, selling or installation.
Before the first cut.
Clear making answers.
What is included with this ice cream paper garland SVG?
The ZIP includes 01-ice-cream-cone-cut.svg, 02-popsicle-cut.svg, 03-sundae-cut.svg, README.txt, cut-map.png, assembled-reference.png. Cut each SVG once for one three-piece set, or duplicate selected files to repeat cones, popsicles or sundaes along a longer garland. Each dessert silhouette is one connected flat paper shape, rather than a layered or folded component. The PNGs explain dimensions and a possible arrangement; they are visual references, not machining files.
How are the paper pieces arranged?
Cut one of each dessert motif, or duplicate files to repeat cones, popsicles or sundaes. Thread a separate maker-supplied cord through the two round hanging holes in each piece. Adjust spacing and secure the ends for your chosen display. No fixed finished garland length is specified. The layout is an illustrative option, rather than a fitted construction or a guarantee of display strength.
Are cord and mounting materials included?
Six 3 mm nominal hanging holes per set, two in each motif. Provide your own suitable thin cord and display support. Check that the cord fits without force and that the paper holds the chosen arrangement. No cord, support bar, mounting hardware or finished display is supplied, and no load rating is specified.
Can I resize or repeat the motifs?
Yes. Keep related pieces at the same proportional scale to preserve the illustrated balance, and recheck every opening, narrow section and cord hole. The supplied sizes are Ice cream cone: 70 × 104 mm; Popsicle: 54 × 96 mm; Sundae: 80 × 92 mm. Changing scale also changes hole sizes and paper strength. Make a fresh prototype after resizing or changing the suspension arrangement.
How do I prepare the SVGs for Glowforge, xTool, Epilog or another laser?
Glowforge: Upload the SVG, check the actual cut dimensions and assign red contours to Cut.
xTool Studio/XCS: Import through software supported by your model. SVG import DPI can affect scale; verify dimensions and assign operations manually.
Epilog: Open the vectors in suitable graphics software. Preserve centered 0.025 mm strokes and output through the driver or Dashboard supported by your model.
Other CO₂/diode systems: For compatible controllers, LightBurn imports SVG. Verify vector operations, usable work area and stock approval for your actual machine and wavelength.
Which paper and settings should I use?
Use plain, uncoated paper or cardstock approved for your exact machine, wavelength and paper-holding method. Confirm unknown coatings, dyes and adhesives before processing. A CO₂-compatible stock is not automatically suitable for a diode laser. Follow the machine maker’s extraction and supervision instructions, and test your own stock. No universal weight, thickness, power, speed or pass count is supplied. The design has not been physically test-cut, assembled, strength-tested or mounting-tested.
Can I sell the paper decorations I make?
Yes. Personal use and sales of finished physical decorations you make are permitted. Do not resell, share, give away or redistribute the digital files, modified digital files or digital parts. Read the included guide for the usage terms. Paper pieces and hanging cords are decorative display materials; use your own suitable installation and keep them away from heat sources.