A little street for the baking corner
A gingerbread facade for the kitchen
Gingerbread Lane is a gingerbread Christmas sign SVG with a house facade and two lines of lettering. Cut and engrave a one-piece plywood plaque for a holiday baking corner, kitchen wall or indoor cookie display.
A long word above a short street name
Spaced capitals fit GINGERBREAD under the two arched windows. The larger slab serifs of LANE give the second line the weight of a street sign. A pitched roof and chimney shape the outer cut. Window panes, small dots and star accents are engraved on the face.
Display the piece near baking books or a holiday kitchen shelf where the lettering and house front can be seen together. Choose a dry position away from kitchen heat and splashes.

Size, paths and mounting
| Digital files | sign.svg, README.txt and design-map.png in a ZIP |
|---|---|
| Cut profile | Gingerbread-house plaque, 175 × 160 mm at the supplied scale |
| SVG page | 185 × 170 mm |
| Mounting | Two round cut holes, each 5 mm in diameter at the supplied scale. Choose your own cord or hardware. |
| Red CUT | Three closed contours with centered 0.025 mm strokes. Two holes and one outer profile. |
| Black ENGRAVE | Filled artwork, inset border and outlined lettering for area engraving. |
| SKU | VD-GL-SIGN |
Dimensions describe the vector geometry before kerf. Allow the machine’s required clearance.
Set up the plaque
-
Confirm scale and stock
Extract the ZIP and import sign.svg at the supplied scale. Confirm the 175 mm outline width and inspect the lettering and small facade marks in the engraving preview. Use uncoated plywood approved for your laser, including its glue and actual thickness. Test engraving, cutting and kerf on matching scrap.
-
Set each operation
Assign black fills to engraving and red paths to through-cutting. Where supported, engrave first, cut the holes next and release the outer profile last. Follow manufacturer instructions for exhaust, stock support and supervision.
-
Check the finished fit
Make a complete prototype and measure the holes. Select cord or fasteners to suit the finished weight and mounting surface. Fit hardware after processing.
The vector geometry was checked digitally. Test a physical sample on your machine. Develop settings for your equipment and plywood. The file includes no universal laser preset.
Import and prepare the SVG
Glowforge. Upload the SVG in the app supported by your model. Check the size, set red to Cut and set black to Engrave.
xTool Studio or XCS. Use the version supported by your machine. Check scale after SVG import, since import DPI can affect dimensions. Assign the closed red profiles to Cut and the filled black shapes to Engrave.
Epilog. Use Pulse SVG import on supported models and firmware. On a vector editor and Dashboard workflow, preserve the centered 0.025 mm strokes and check that the driver recognizes them as vector cuts. Keep black fills on the engraving process.
Other CO₂ or diode lasers. Check machine support for the plywood and its thickness. In supported software such as LightBurn, verify the millimeter dimensions and set red to a cutting Line layer and black to an engraving Fill layer. Preview the job and confirm the planned order.
Common questions
What is included in the download?
The ZIP contains sign.svg, README.txt and design-map.png. Process the SVG. The English guide explains setup and use, and the PNG shows the layout for reference. The download contains digital files only.
How big is the Gingerbread Lane kitchen sign?
The plaque measures 175 × 160 mm on a 185 × 170 mm SVG page. The lettering and facade details engrave into the face. Preview them at the supplied scale and check that the smallest details remain clear on your scrap sample.
Can I use this file on Glowforge, xTool or Epilog?
Yes, through the supported import workflows above. For CO₂ or diode setups, check usable bed space and approved plywood thickness. Verify size and operation assignments before processing.
Can I resize it or sell finished signs?
Scale every path together and recheck engraving detail, hole diameter and edge clearance. You may sell finished signs you make. Keep the original and modified digital files for your own use. See the README for terms.