$1.20

North Pole Post Christmas Sign SVG

0 reviews
  • Subtotal

    {{ currencyFormat( pricing_summary.total_amount ) }}

A Christmas sign for the holiday mail

An envelope from the North Pole

North Pole Post is a North Pole sign SVG with an envelope, a snowflake postmark and the words NORTH POLE POST. The horizontal plywood plaque makes a playful backdrop for a Christmas letter station, an entry shelf or a stack of holiday cards.

224 × 124 mm outlineOne-piece plywood plaqueSVG + English guide + design map

Lettering with the rhythm of a postmark

NORTH POLE establishes the place in a row of compact serifs. The larger POST below it gives the left side the weight of a label. On the right, the folded envelope and circular snowflake postmark carry the postal theme. The gently scalloped outline gives the plaque its postage-stamp shape.

The wide shape suits a low shelf or an open area above a letter basket. Keep enough free space around the ends to read the whole plaque at a glance.

Wooden North Pole Post sign with an envelope and snowflake postmark in a Christmas mail display.
North Pole Post brings an envelope and snowflake postmark to a Christmas letter display. Illustrative display. Digital files only.

Size, paths and mounting

North Pole Post Christmas Sign SVG specifications
Digital files sign.svg, README.txt and design-map.png in a ZIP
Cut profile Wide plaque with a stamp edge, 224 × 124 mm at the supplied scale
SVG page 234 × 134 mm
Mounting Two round cut holes, each 5 mm in diameter at the supplied scale. Choose your own cord or hardware.
Red CUT Three closed contours with centered 0.025 mm strokes. Two holes and one outer profile.
Black ENGRAVE Filled artwork, inset border and outlined lettering for area engraving.
SKU VD-NP-SIGN

Dimensions describe the vector geometry before kerf. Allow the machine’s required clearance.

Set up the plaque

  1. Confirm scale and stock

    Extract the ZIP and import sign.svg at the supplied scale. Check the 224 mm outline width and keep both holes, the outline and all engraving together if you rotate the job. Use uncoated plywood approved for your laser, including its glue and actual thickness. Test engraving, cutting and kerf on matching scrap.

  2. Set each operation

    Assign black fills to engraving and red paths to through-cutting. Where supported, engrave first, cut the holes next and release the outer profile last. Follow manufacturer instructions for exhaust, stock support and supervision.

  3. Check the finished fit

    Make a complete prototype and measure the holes. Select cord or fasteners to suit the finished weight and mounting surface. Fit hardware after processing.

The vector geometry was checked digitally. Test a physical sample on your machine. Develop settings for your equipment and plywood. The file includes no universal laser preset.

Import and prepare the SVG

Glowforge. Upload the SVG in the app supported by your model. Check the size, set red to Cut and set black to Engrave.

xTool Studio or XCS. Use the version supported by your machine. Check scale after SVG import, since import DPI can affect dimensions. Assign the closed red profiles to Cut and the filled black shapes to Engrave.

Epilog. Use Pulse SVG import on supported models and firmware. On a vector editor and Dashboard workflow, preserve the centered 0.025 mm strokes and check that the driver recognizes them as vector cuts. Keep black fills on the engraving process.

Other CO₂ or diode lasers. Check machine support for the plywood and its thickness. In supported software such as LightBurn, verify the millimeter dimensions and set red to a cutting Line layer and black to an engraving Fill layer. Preview the job and confirm the planned order.

Common questions

What is included in the download?

The ZIP contains sign.svg, README.txt and design-map.png. Process the SVG. The English guide explains setup and use, and the PNG shows the layout for reference. The download contains digital files only.

Will the North Pole Post plaque fit my laser bed?

The outer profile measures 224 × 124 mm and the SVG page is 234 × 134 mm. Compare the outline and required machine clearance with your usable bed. Rotate the engraving and all three cut paths together if you need a different orientation.

Can I use this file on Glowforge, xTool or Epilog?

Yes, through the supported import workflows above. For CO₂ or diode setups, check usable bed space and approved plywood thickness. Verify size and operation assignments before processing.

Can I resize it or sell finished signs?

Scale every path together and recheck engraving detail, hole diameter and edge clearance. You may sell finished signs you make. Keep the original and modified digital files for your own use. See the README for terms.

North Pole Post Christmas Sign SVG has received 0 reviews with an average rating of out of 5
Reviews are enabled for non customers for demo purposes