An ice star on a wooden teardrop
A four-point star inside a sweeping orbit
Frost Orbit is a Christmas teardrop earrings SVG for cutting two matching wooden drops. A four-point ice star and a curved orbit sit on the face of each piece beneath a round hardware hole.
An orbit that follows the drop
The teardrop widens below the hole and gives the star room at the center. The orbital flourish sweeps around the star and echoes the lower curve of the drop. Both elements are engraved so the face stays intact.
Images illustrate a possible finished appearance. The download contains digital files. Supply your own stock, hardware and finishing materials.

Size, cut paths and mounting
| Download | design.svg, README.txt and design-map.png in a ZIP |
|---|---|
| Cut profile | Matched pair of solid teardrop drops, 23 × 37 mm per drop |
| SVG page | 66 × 47 mm |
| Hardware holes | One 2 mm round upper cut hole per drop |
| Red cut paths | Four closed red contours for two outer profiles and two hardware holes. Centered 0.025 mm strokes. |
| Black engraving | Four-point ice star and a curved orbital flourish on each drop |
| Material | One layer of uncoated plywood approved for the exact machine and operations. Nominal 2–3 mm stock is a prototype starting point where supported. |
| SKU | VD-FO-EAR |
Dimensions describe the vector geometry before kerf. The finished hole diameter and remaining material depend on stock and machine settings.
Cut, engrave and fit the hardware
-
Import and check scale
Extract the ZIP and import design.svg at its supplied size. Check the separation between the ice star and the orbit in the engraving preview. Verify that the pair measures 23 × 37 mm per drop and that both hardware holes are assigned to cutting.
-
Assign each operation
Set the black fills to engraving and the red paths to through-cutting. Where your software supports it, engrave first, cut the holes and any inner openings next, then release the outer profiles.
-
Check the finished fit
Fit compatible jump rings and your own hooks after machining. Test that the rings move freely through the holes and that both drops hang naturally before making additional pairs.
The geometry was verified digitally. Make a physical prototype to check cutting, engraving contrast, material strength and hardware fit before producing multiples.
Prepare the SVG for your laser
Glowforge. Import the SVG in the app supported by your model. Verify the cut size, set black to Engrave and red to Cut, and preview the operation order.
xTool Studio or XCS. Use the software your machine supports and check the SVG import DPI. Confirm the size in millimeters. Assign the black fills to Engrave and the red vectors to Cut.
Epilog. Use Pulse SVG import on supported models and firmware. In a vector editor and Dashboard workflow, retain the centered 0.025 mm red strokes and confirm that they register as vectors. Route black fills to engraving.
CO₂ or diode lasers. Use an SVG workflow such as LightBurn with supported equipment. Use a cutting Line layer for red and an engraving Fill layer for black. Confirm the selected stock is suitable for your wavelength and test on scrap of the same material. Follow your machine’s exhaust and supervision instructions.
Common questions
What comes with the digital download?
The ZIP contains design.svg, README.txt and design-map.png. Use the SVG for machining. The PNG explains the operation colors and the English guide covers setup and fit. Supply your own wood and hardware.
Does the orbit cut an opening in the wood?
The orbit and four-point star are surface engravings. The red paths cut the teardrop outlines and nominal 2 mm hardware holes. The pair is arranged on a single 66 × 47 mm SVG page.
Can I use the file with a CO₂ or diode laser?
Use the SVG workflow supported by your controller. Check that the machine manufacturer approves your plywood, including its glue and thickness. Verify the imported size and test both operations on matching scrap.
Can I resize the design or sell the pieces I make?
Scale all cut and engraving paths together and check the hardware fit and remaining wood around the holes. You may sell finished physical pieces you make. See the README for the digital-file terms.