A Christmas bell at pendant scale
An engraved scallop and three stars
Solstice Bell is a Christmas bell pendant SVG for making a single wooden charm. Its sculpted outline frames three small stars and an engraved scallop along the bell lip.
A scallop that follows the lip
The bell flares toward the lower edge and tapers toward a small upper mounting area. Three stars fill the space above the lip. The scalloped detail is engraved into the face, following the curve of the bell.
Images illustrate a possible finished appearance. The download contains digital files. Supply your own stock, hardware and finishing materials.

Size, cut paths and mounting
| Download | design.svg, README.txt and design-map.png in a ZIP |
|---|---|
| Cut profile | Single sculpted bell silhouette, 34 × 40 mm |
| SVG page | 44 × 50 mm |
| Hardware holes | One 2.5 mm round upper cut hole |
| Red cut paths | Two closed red contours for the bell profile and hardware hole. Centered 0.025 mm strokes. |
| Black engraving | Scalloped lip detail and three small stars |
| Material | One layer of uncoated plywood approved for the exact machine and operations. Nominal 2–3 mm stock is a prototype starting point where supported. |
| SKU | VD-SB-PEN |
Dimensions describe the vector geometry before kerf. The finished hole diameter and remaining material depend on stock and machine settings.
Cut, engrave and fit the hardware
-
Import and check scale
Extract the ZIP and import design.svg at its supplied size. Confirm the 34 × 40 mm outline and preview the small stars and scalloped engraving at that scale. Test the hole and jump ring together on one finished sample.
-
Assign each operation
Set the black fills to engraving and the red paths to through-cutting. Where your software supports it, engrave first, cut the holes and any inner openings next, then release the outer profiles.
-
Check the finished fit
Use a jump ring or cord suited to the 2.5 mm nominal hole and the thickness of your finished plywood. Fit it after machining and any finishing.
The geometry was verified digitally. Make a physical prototype to check cutting, engraving contrast, material strength and hardware fit before producing multiples.
Prepare the SVG for your laser
Glowforge. Import the SVG in the app supported by your model. Verify the cut size, set black to Engrave and red to Cut, and preview the operation order.
xTool Studio or XCS. Use the software your machine supports and check the SVG import DPI. Confirm the size in millimeters. Assign the black fills to Engrave and the red vectors to Cut.
Epilog. Use Pulse SVG import on supported models and firmware. In a vector editor and Dashboard workflow, retain the centered 0.025 mm red strokes and confirm that they register as vectors. Route black fills to engraving.
CO₂ or diode lasers. Use an SVG workflow such as LightBurn with supported equipment. Use a cutting Line layer for red and an engraving Fill layer for black. Confirm the selected stock is suitable for your wavelength and test on scrap of the same material. Follow your machine’s exhaust and supervision instructions.
Common questions
What comes with the digital download?
The ZIP contains design.svg, README.txt and design-map.png. Use the SVG for machining. The PNG explains the operation colors and the English guide covers setup and fit. Supply your own wood and hardware.
Will a necklace chain fit directly through the hole?
The design has a nominal 2.5 mm round hole. Check the finished diameter against your hardware. A suitable jump ring can connect the bell to a chain or cord. The SVG page is 44 × 50 mm.
Can I use the file with a CO₂ or diode laser?
Use the SVG workflow supported by your controller. Check that the machine manufacturer approves your plywood, including its glue and thickness. Verify the imported size and test both operations on matching scrap.
Can I resize the design or sell the pieces I make?
Scale all cut and engraving paths together and check the hardware fit and remaining wood around the holes. You may sell finished physical pieces you make. See the README for the digital-file terms.