A candle at an arched winter window
An arched window with snow beyond it
Window of Noel is a Christmas window shadow box SVG for an assembled scene in four layers. An arched window, taper candle and holly sit in front of two firs, bare trunks and a hillside.
A close sill and a more distant winter scene
The candle and holly give the sill the closest detail. Beyond the arch, two firs sit in front of thinner trunks and a hillside. Engraved dots on the solid backing show through as falling snow.
The ZIP contains digital files. Supply your own wood, finish, adhesive and display hardware.

Sizes and layer order
| Download | 01-front.svg, 02-middle.svg, 03-background.svg, 04-backing.svg, README.txt and assembly-map.png in a ZIP |
|---|---|
| Finished footprint | 120 × 120 mm per layer |
| SVG page size | 130 × 130 mm per SVG |
| Front to back | Arched window, sill, candle and holly → two firs and a snow slope → hillside and bare trunks → solid backing with falling snow |
| Red cut paths | Closed 0.025 mm centerline strokes for the outer profiles and any interior openings |
| Black engraving | Black filled surface marks for the fine decorative details and snow |
| Stock | Uncoated plywood approved for the exact laser and operations. Nominal 3 mm plywood gives an approximately 12 mm bare stack before adhesive or finish. |
| SKU | VD-WN-SBX |
Dimensions describe the vector geometry before kerf. The thickness of the assembled piece depends on the stock and adhesive you use.
Cut and assemble the scene
-
Import and check scale
Extract the ZIP. Open each numbered SVG at the supplied size and compare its outer profile with the millimeter dimensions above before machining. Check the arched opening, candle and holly before processing. Preview how the snow and firs show through the opening when the layers are aligned.
-
Assign the cuts and engraving
Set red to through-cutting and any black fills to engraving. Where the software supports the order, run engraving first, cut the interior openings next, then release the outer profiles. Check the planned operations on scrap first.
-
Dry fit and assemble
Align the outer edges and dry fit all four layers. Add suitable adhesive at the contact areas after machining. Keep the stack flat during curing. Keep the taper and the holly closest to the viewer. Check that the firs and hillside are visible through the arch before gluing. Measure the assembled stack for a stand or frame if you plan to use one.
The geometry was verified digitally. Make a physical prototype to check cut quality, layer fit and the final display method before producing multiples.
Prepare the SVGs for your machine
Glowforge. Import each SVG in the app supported by your model. Verify the size, set red to Cut and black fills to Engrave where present, and preview the operation order.
xTool Studio or XCS. Use the software your machine supports and check the SVG import DPI. Verify the size in millimeters for each numbered layer. Assign red vectors to Cut and any black fills to Engrave.
Epilog. Use Pulse SVG import on supported models and firmware. In a vector editor and Dashboard workflow, retain centered 0.025 mm red strokes and confirm that they register as vectors. Route any black fills to engraving.
CO₂ or diode lasers. Use an SVG workflow such as LightBurn with equipment it supports. Assign red to a cutting Line layer and any black fills to an engraving Fill layer. Confirm that the stock and any glue in the plywood suit the wavelength and equipment. Use matching scrap to establish settings and follow your manufacturer’s exhaust and supervision instructions.
Common questions
What comes with the digital download?
The ZIP contains 01-front.svg, 02-middle.svg, 03-background.svg, 04-backing.svg, README.txt and assembly-map.png. Cut from the SVGs and check the order on the map. Supply stock, adhesive and any display hardware.
Does the candle in Window of Noel need a light?
The taper is part of the front layer. The scene can be assembled from the four cut layers without lighting. The file set includes the artwork, English guide and assembly map. Supply your own display hardware if you need it.
Can I use the files with a CO₂ or diode laser?
Use the SVG workflow your controller supports and stock approved for your laser. Match the outer dimensions across layers. Test cutting, engraving and fit on matching scrap.
Can I resize the project or sell the scenes I make?
Scale all layers together. Check small details, connector widths and fit again. You may sell finished pieces you make. See the README for the digital file terms.