$1.20

Yuletide Ferry Christmas Shadow Box SVG

0 reviews
  • Subtotal

    {{ currencyFormat( pricing_summary.total_amount ) }}

A winter crossing

A ferry carrying a Christmas fir

Yuletide Ferry is a Christmas ferry shadow box SVG with a small fir aboard and a snowy shoreline behind. A low snowbank and engraved ripples cross the front of the square panel.

120 × 120 mm per layerFour stacked layersSVG + English guide + assembly map

A little fir on the deck

The ferry points to the right, with three engraved cabin windows below its short stack. The small deck fir marks the season, while the receding shoreline gives the cut layers room to show. A lighter wood tone on the back layer can help the ferry silhouette stand clear.

The ZIP contains digital files. Supply your own wood, finish, adhesive and display hardware.

Yuletide Ferry layered wood artwork displayed upright, showing the ferry, its deck fir and the winter shore.
The small fir on the ferry stands in front of the snowy shore. Illustrative display. Digital files only.

Sizes and layer order

Yuletide Ferry Christmas Shadow Box SVG specifications
Download 01-front.svg, 02-middle.svg, 03-background.svg, 04-backing.svg, README.txt and assembly-map.png in a ZIP
Finished footprint 120 × 120 mm per layer
SVG page size 130 × 130 mm per SVG
Front to back 01 snowbank and water ripples, 02 ferry cabin and deck fir, 03 snowy shore and firs, 04 engraved winter sky on a solid backing.
Red cut paths Closed 0.025 mm centerline strokes for the outer profiles and any interior openings
Black engraving Front water ripples, cabin windows and winter sky marks.
Stock Uncoated plywood approved for the exact laser and operations. Nominal 3 mm plywood gives an approximately 12 mm bare stack before adhesive or finish.
SKU VD-YF-SBX

Dimensions describe the vector geometry before kerf. The thickness of the assembled piece depends on the stock and adhesive you use.

Cut and assemble the scene

  1. Import and check scale

    Extract the ZIP. Open each numbered SVG at the supplied size and compare its outer profile with the millimeter dimensions above before machining. Inspect the deck fir and other small details in the cutting preview. Keep the boat and its attached details together when removing the surrounding scrap.

  2. Assign the cuts and engraving

    Set red to through-cutting and any black fills to engraving. Where the software supports the order, run engraving first, cut the interior openings next, then release the outer profiles. Use a test coupon from the same stock to check engraving, kerf and the smallest opening before machining the panels.

  3. Dry fit and assemble

    Align the outer edges and dry fit all four layers. Add suitable adhesive at the contact areas after machining. Keep the stack flat during curing. Set the foreground bank over the ferry and the snowy shore. Check from the front that the deck fir and water marks are visible before bonding the stack.

The geometry was verified digitally. Make a physical prototype to check cut quality, layer fit and the final display method before producing multiples.

Prepare the SVGs for your machine

Glowforge. Upload each SVG in the Glowforge app. Confirm the 120 mm cut profile, assign red to Cut and any black fills to Engrave, then check the operation order. If both cuts appear in one step, make a working copy with a different stroke color for the perimeter. Assign that color to Cut and place it last. Glowforge SVG upload · Glowforge operation order

xTool Studio or XCS. Use the software your model supports. Compare each imported cut profile with the 120 mm specification and check the SVG import DPI if the size differs. Assign red vectors to Cut and any black fills to Engrave. xTool vector import guide

Epilog. Import the SVGs into Pulse on supported models and firmware. If you use a supported vector editor and Dashboard, retain the centered 0.025 mm red strokes and confirm that the driver recognizes them as vector cuts. Route any black fills to engraving. Epilog Pulse setup guide · Epilog Dashboard vector jobs

CO₂ or diode lasers. Use the SVG workflow supported by your controller. In LightBurn, assign red to a cutting Line layer and any black fills to an engraving Fill layer. Confirm that your machine supports both the wood and the adhesive used to make the plywood. Establish settings with a test coupon and follow your manufacturer’s exhaust and supervision instructions. LightBurn SVG import

Common questions

What comes with the digital download?

The ZIP contains 01-front.svg, 02-middle.svg, 03-background.svg, 04-backing.svg, README.txt and assembly-map.png. Cut from the SVGs and check the order on the map. Supply stock, adhesive and any display hardware.

Is the fir on the ferry a separate piece?

The fir is part of the ferry panel. Use the numbered layers as supplied and keep the on-deck detail attached while cleaning the cut edge.

Can I use the files with a CO₂ or diode laser?

Use the SVG workflow your controller supports and stock approved for your laser. Match the outer dimensions across layers. Test cutting, engraving and fit on matching scrap.

Can I resize the project or sell the scenes I make?

Scale all layers together. Check small details, connector widths and fit again. You may sell finished pieces you make. See the README for the digital file terms.

Yuletide Ferry Christmas Shadow Box SVG has received 0 reviews with an average rating of out of 5
Reviews are enabled for non customers for demo purposes