$1.20

Midwinter Fawn Christmas Layered Art SVG

0 reviews
  • Subtotal

    {{ currencyFormat( pricing_summary.total_amount ) }}

A winter clearing

A seated fawn in a snowy clearing

Midwinter Fawn is a Christmas fawn layered art SVG with a single seated deer in a snowy clearing. Engraved spots follow its back and bare winter branches rise behind it.

120 × 120 mm per layerFour stacked layersSVG + English guide + assembly map

Coat spots in the foreground

The fawn faces right with its legs tucked under, just behind a shallow snowbank. Engraved spots follow its back and a dark eye picks out the face. Use a lighter tone for the backing if you want more definition around the bare branches.

The ZIP contains digital files. Supply your own wood, finish, adhesive and display hardware.

Midwinter Fawn layered wood artwork displayed upright, with a seated spotted fawn and winter trees.
The seated fawn rests above a light snowbank, with winter branches behind it. Illustrative display. Digital files only.

Sizes and layer order

Midwinter Fawn Christmas Layered Art SVG specifications
Download 01-front.svg, 02-middle.svg, 03-background.svg, 04-backing.svg, README.txt and assembly-map.png in a ZIP
Finished footprint 120 × 120 mm per layer
SVG page size 130 × 130 mm per SVG
Front to back 01 shallow snowbank and winter stems, 02 seated fawn, 03 branching trees and hillside, 04 engraved snowfall on a solid backing.
Red cut paths Closed 0.025 mm centerline strokes for the outer profiles and any interior openings
Black engraving Fawn coat spots and eye detail, plus winter marks shown on the layer maps.
Stock Uncoated plywood approved for the exact laser and operations. Nominal 3 mm plywood gives an approximately 12 mm bare stack before adhesive or finish.
SKU VD-MF-LAY

Dimensions describe the vector geometry before kerf. The thickness of the assembled piece depends on the stock and adhesive you use.

Cut and assemble the scene

  1. Import and check scale

    Extract the ZIP. Open each numbered SVG at the supplied size and compare its outer profile with the millimeter dimensions above before machining. Test the engraved coat spots and fine contours on a coupon cut from the same stock. Keep the fawn connected to its layer when removing the outside scrap.

  2. Assign the cuts and engraving

    Set red to through-cutting and any black fills to engraving. Where the software supports the order, run engraving first, cut the interior openings next, then release the outer profiles. Use a test coupon from the same stock to check engraving, kerf and the smallest opening before machining the panels.

  3. Dry fit and assemble

    Align the outer edges and dry fit all four layers. Add suitable adhesive at the contact areas after machining. Keep the stack flat during curing. Dry fit the foreground and trees over the backing. Check that the ears and coat detail remain visible when the layers sit together.

The geometry was verified digitally. Make a physical prototype to check cut quality, layer fit and the final display method before producing multiples.

Prepare the SVGs for your machine

Glowforge. Upload each SVG in the Glowforge app. Confirm the 120 mm cut profile, assign red to Cut and any black fills to Engrave, then check the operation order. If both cuts appear in one step, make a working copy with a different stroke color for the perimeter. Assign that color to Cut and place it last. Glowforge SVG upload · Glowforge operation order

xTool Studio or XCS. Use the software your model supports. Compare each imported cut profile with the 120 mm specification and check the SVG import DPI if the size differs. Assign red vectors to Cut and any black fills to Engrave. xTool vector import guide

Epilog. Import the SVGs into Pulse on supported models and firmware. If you use a supported vector editor and Dashboard, retain the centered 0.025 mm red strokes and confirm that the driver recognizes them as vector cuts. Route any black fills to engraving. Epilog Pulse setup guide · Epilog Dashboard vector jobs

CO₂ or diode lasers. Use the SVG workflow supported by your controller. In LightBurn, assign red to a cutting Line layer and any black fills to an engraving Fill layer. Confirm that your machine supports both the wood and the adhesive used to make the plywood. Establish settings with a test coupon and follow your manufacturer’s exhaust and supervision instructions. LightBurn SVG import

Common questions

What comes with the digital download?

The ZIP contains 01-front.svg, 02-middle.svg, 03-background.svg, 04-backing.svg, README.txt and assembly-map.png. Cut from the SVGs and check the order on the map. Supply stock, adhesive and any display hardware.

Are the fawn's coat spots cut through?

The spots are black surface details for engraving. Keep the red contour vectors on the cut layer and preview both operations before machining the full panel.

Can I use the files with a CO₂ or diode laser?

Use the SVG workflow your controller supports and stock approved for your laser. Match the outer dimensions across layers. Test cutting, engraving and fit on matching scrap.

Can I resize the project or sell the scenes I make?

Scale all layers together. Check small details, connector widths and fit again. You may sell finished pieces you make. See the README for the digital file terms.

Midwinter Fawn Christmas Layered Art SVG has received 0 reviews with an average rating of out of 5
Reviews are enabled for non customers for demo purposes