Kindness and service
Give Kindly, Serve Gladly
Open Hands is a Christian service sign SVG with two open hands, a heart and the original words GIVE KINDLY SERVE GLADLY. The softly clipped square makes a one-piece plaque for an indoor wall or community room.
Open hands around a heart
Two palms cup a heart beneath the words GIVE KINDLY and SERVE GLADLY. The motif and both lines sit on the same cut panel and are set to engrave.
The ZIP contains digital files. Supply your own wood, finish and display hardware.

Size and operations
| Download | design.svg, README.txt and design-map.png in a ZIP |
|---|---|
| Cut footprint | 156 × 156 mm |
| SVG page | 166 × 166 mm |
| Profile | Square plaque with softly clipped corners |
| Display mounting | Two Ø5 mm holes, 106 mm apart on center and 21 mm below the top of the outline. Supply your own cord or hardware. |
| Red cut paths | One closed outer profile and two mounting holes, all with centered 0.025 mm strokes. |
| Black engraving | Outlined lettering, open hand outlines and heart on the plaque face. |
| Stock | Use uncoated plywood approved for the exact laser and operation. Use nominal 3 mm stock where your machine and the material allow it. |
| SKU | VD-OH-SGN |
Dimensions refer to the vector geometry before kerf. Keep any required clearance around the profile on your usable laser bed.
From the SVG to the finished sign
-
Import and confirm size
Extract the ZIP and open design.svg at its supplied scale. Check the 156 mm square profile and both mounting holes. Test the hand contours and the smallest letter spaces on a coupon of the chosen stock.
-
Assign the operations
Assign red centerlines to through-cutting and black filled shapes to engraving. Engrave first, cut any interior openings next and release the outer profile last when your software supports that order. Test kerf, detail and cut depth on a coupon from the same stock.
-
Check the display fit
Test the finished hole fit before adding a cord or mounting the sign. Choose fasteners and a wall position suited to the finished piece.
The vector geometry was checked digitally. Cut a physical prototype to confirm your settings, the small details and the display fit before producing multiples.
Prepare the file for your machine
Glowforge. Upload the SVG and confirm its outline size. Assign red to Cut and black fills to Engrave. If interior and perimeter cuts appear in one step, give the perimeter a separate stroke color in a working copy and place that Cut step last. Glowforge SVG upload · Glowforge operation order
xTool Studio or XCS. Use the software supported by your model. Confirm the outline in millimeters and check the SVG import DPI if the size differs. Set red vectors to Cut and black fills to Engrave. xTool vector import guide
Epilog. Open the SVG with Pulse on supported models and firmware. In a supported vector editor and Dashboard workflow, retain the centered 0.025 mm cut strokes and confirm that the driver reads them as vector cuts. Route the black fills to engraving. Epilog Pulse setup guide · Epilog Dashboard vector jobs
CO₂ or diode lasers. Use software that supports SVG and your controller. In LightBurn, use Line mode for cutting and Fill mode for engraving. Verify your machine supports the plywood and its adhesive, test on matching stock and follow the manufacturer’s exhaust and supervision instructions. LightBurn SVG import · LightBurn cut modes
Common questions
What comes with the digital download?
The ZIP contains design.svg, README.txt and design-map.png. Process the SVG and use the guide and design map to check the operation assignments. Supply your own wood and display hardware.
Which parts of Open Hands are engraved?
The hands, heart and both lines of original lettering are engraved into the face. Red cut paths form the softly clipped square and the two 5 mm mounting holes.
Can I use this SVG with a CO₂ or diode laser?
Use SVG-capable software that supports your controller. Check the plywood's thickness and adhesive against your machine's material guidance. Compare the profile with your usable bed and test the cut and engraving on matching scrap.
Can I resize the design or sell finished pieces?
Scale all vectors together. Recheck detail size, any mounting clearance and the strength of the narrowest connections. You may sell finished physical pieces you make. See the README for the digital file terms.