A little luck. A fresh green season.
Shamrock ornament SVG.
A small gesture of good fortune.
Clover Meadow is an original shamrock ornament SVG for St Patrick's Day, with three heart-shaped leaf engravings and a curved stem mark. The nominal outline is 100 × 120 mm, including the integral hanging tab, with one 5 mm hole. Includes one SVG and an English laser-preparation guide. Digital files only.
A St Patrick’s Day shamrock.
Three leaves, one keepsake.
Clover Meadow celebrates St Patrick's Day with a broad three-leaf shamrock and a curved integral stem. Heart-shaped engravings echo the leaves while a single curved mark follows the stem. The uncomplicated silhouette brings a playful detail to a spring branch, a seasonal gift or a small display.
The three heart-shaped leaf marks and curved stem mark are four filled surface engravings. They do not cut through the face. The outside silhouette, including the rounded hanging tab, remains one connected flat piece; the only internal cut is the circular hanging hole.
The images illustrate a possible finished appearance and setting. Digital SVG and English guide only; finished ornaments, material, cord, tools, finishing supplies and styling props are not included.
One connected clover.
Four surface engravings.
| Download | ZIP containing exactly two files: clover-meadow-shamrock.svg and README.txt |
|---|---|
| Nominal vector outline | 100 × 120 mm including the integral hanging tab; path-centerline dimensions before kerf and finishing |
| Hanging hole | One 5 mm circular hole at the supplied size, centered at x=50 mm, y=7.5 mm; choose cord for the finished hole |
| Construction | One flat solid piece with surface engraving; no decorative cutout openings, separate layers or assembly parts |
| Surface decoration | Three heart-shaped leaf marks and one curved stem mark (4 filled shapes) |
| Operations | 2 red (#FF0000), unfilled closed cut paths with centered 0.025 mm strokes: outside silhouette and 5 mm hanging hole; 4 black (#000000), closed filled surface-engraving paths without strokes. No fold or score paths. |
| Material | Identified sheet stock confirmed suitable by its manufacturer and your exact laser/wavelength instructions; no universal stock thickness or machine settings supplied |
| File construction | Closed path-based SVG with dimensions in mm; no live fonts, raster or linked images, transforms, masks or filters |
| Product code | VD-CM-SP |
Prepare the shapes.
Make a little good fortune.
-
Check the import
Extract the ZIP and import the SVG at 100%. Verify the 100 × 120 mm outline, 5 mm hole and both operation groups. Confirm approved stock, usable bed and focus requirements.
-
Engrave before release
Assign the 4 black filled shapes to engraving and the two red contours to cutting. Inspect Preview and establish settings on a scrap. Where supported, engrave first, cut the hanging hole next and release the outside edge last.
-
Finish and display
Keep all four leaf and stem marks assigned to engraving. Finish the approved stock as appropriate and thread your own suitable cord through the finished hole. Check the finished hole, edges and intended hanging arrangement on a complete prototype.
This design has not been physically test-cut or test-engraved. Test a scrap, then make a complete prototype with your actual software, machine and approved stock before producing a batch. No universal laser preset is supplied.
Before the first cut.
Practical details for making.
What files will I receive?
The ZIP contains clover-meadow-shamrock.svg and README.txt. The SVG combines the two cut contours and 4 surface-engraving shapes in named groups. The English guide covers dimensions, machine preparation and usage terms. Alternate formats, presets and physical goods are not included.
Is this a finished ornament?
This is a digital download only. You supply the approved material, machine, suitable cord and finishing supplies. A flat St Patrick's Day hanging decoration. The three heart-shaped leaf marks and stem detail are surface engravings on a solid face. There are no decorative cutouts, separate leaves or layered assembly.
What size is the design, and does it need assembly?
The nominal outline is 100 × 120 mm, including the integral hanging tab, with one 5 mm hole. Dimensions describe the vector centerlines before kerf and finishing. It makes one flat solid piece; all decorative marks are surface engravings and there are no separate design layers to assemble.
How do I prepare it for Glowforge, xTool, Epilog or another laser?
Glowforge: Upload the SVG in the app supported by your exact model. Verify 100 × 120 mm and the 5 mm hole. Assign black filled shapes to Engrave and both red contours to Cut. Inspect the preview and establish settings for your approved stock.
xTool Studio / XCS: Import using software supported by your model. Studio SVG import DPI and XCS automatic resizing can change dimensions. Check the physical size and explicitly assign red to Cut and black filled decoration to Engrave.
Epilog: Open the SVG in supported vector graphics software and use the driver or Dashboard for your exact model. For the documented Illustrator-to-Dashboard route, retain centered cut strokes no wider than 0.025 mm and confirm vector recognition. Keep filled black shapes assigned to engraving. This is a conditional software route, rather than a universal direct machine import.
Other CO₂ or diode equipment: Confirm controller/software support. On supported LightBurn systems, import the SVG, verify dimensions, map red contours to a tested Line cut layer and black closed regions to a tested Fill engraving layer. Check Preview, operation order, usable bed and stock approval for the exact machine and wavelength.
Which material and laser settings should I use?
Use only identified stock approved for the exact machine and wavelength. Custom stock needs its own settings checks. No universal thickness, power, speed or pass count is supplied. Follow your maker’s current exhaust, supervision and fire-safety instructions. This design has not been physically test-cut or test-engraved. Test a scrap, then make a complete prototype with your actual software, machine and approved stock before producing a batch. No universal laser preset is supplied.
Can I resize the ornament?
Scale all paths together. Resizing changes the hanging hole, material bridges and engraved details. Check the new dimensions and every operation in Preview, then make a fresh prototype. Select cord for the actual finished hole.
May I sell finished physical items?
Personal projects and sales of finished physical items you make are permitted. Do not resell, share, give away, sublicense or redistribute the SVG, guide, modified digital files or digital parts, including in bundles or shared libraries. The README contains the usage terms; copyright ownership is not transferred.