$1.20

Comet Carols Christmas Ornament SVG

0 reviews
  • Subtotal

    {{ currencyFormat( pricing_summary.total_amount ) }}

An ornament shaped like a passing comet

CAROLS IN ORBIT beside a bright star

Comet Carols is a Christmas comet ornament SVG with a tapered tail and engraved orbital curves. A radiant four-point star draws the eye to the left of the original CAROLS IN ORBIT lettering.

98 × 73 mm outlineOne-piece plywood ornamentSVG + English guide + design map

Orbital lines along a tapered comet tail

The comet runs across the face in a low, wide shape. The star anchors the left side while two lines of lettering sit to its right. Engraved orbital strokes follow the outer sweep and keep the design moving toward the tip.

Hang the finished comet with star ornaments or across the top of a wrapped gift. Leave space around the wide tail and check detail at the supplied scale before reducing the file.

Comet Carols plywood ornament with a swept tail and CAROLS IN ORBIT lettering in a Christmas display.
The star and its orbital lines lead into the outlined words CAROLS IN ORBIT. Illustrative display. Digital files only.

Size, paths and hanging hole

Comet Carols Christmas Ornament SVG specifications
Download ornament.svg, README.txt and design-map.png in a ZIP
Cut profile Elongated comet silhouette with a swept, tapered tail on the right, 98 × 73 mm
SVG page 108 × 83 mm
Hanging hole One round 4 mm cut hole at the top
Cut paths Two closed red contours for the hanging hole and outer profile, with centered 0.025 mm strokes
Engraving Four-point star, orbital lines and original outlined CAROLS IN ORBIT lettering
Material Uncoated plywood approved for the exact laser and operation. Nominal 3 mm plywood is a starting point if the stock is approved.
SKU VD-CO-ORN

The dimensions describe the vector geometry before kerf. Leave the clearance your machine requires and allow for the thickness of the cord.

From SVG to a hanging decoration

  1. Import and check scale

    Extract the ZIP and import ornament.svg at its supplied size. Test a scrap of the same approved plywood. Inspect the tail in the cut preview and the smaller IN ORBIT lettering in the engraving preview. Test both on matching stock before processing the piece.

  2. Assign cut and engraving

    Assign the black fills to engraving and the red paths to cutting. Where the controller supports it, engrave first, cut the hanging hole and release the outer profile last.

  3. Fit the hanging cord

    Once the piece has cooled, remove loose residue and test your chosen cord in the hole. Choose a cord that fits the finished diameter and supports the weight of your ornament.

The geometry was verified digitally. Make a physical test piece to check settings, engraving contrast and cord fit.

Prepare the file for your machine

Glowforge. Import the SVG in the app supported by your model. Compare the cut size with the dimensions above, assign black to Engrave and red to Cut, and preview the operation order.

xTool Studio or XCS. Use the software supported by your machine and check the SVG import DPI. Verify the resulting size in millimeters. Assign black fills to Engrave and the thin red outlines to Cut.

Epilog. Use Pulse SVG import on supported models and firmware. In a vector editor and Dashboard workflow, retain the centered 0.025 mm red strokes and check that the driver recognizes them as vectors. Route the black fills to engraving.

CO₂ or diode lasers. Use an SVG workflow such as LightBurn with equipment it supports. Verify the size and that the stock and its adhesive are suitable for your wavelength. Set red to a cutting Line layer and black to an engraving Fill layer. Follow your machine’s exhaust and supervision instructions and derive settings from a scrap sample.

Common questions

What comes with the digital download?

The ZIP contains ornament.svg, README.txt and design-map.png. Cut and engrave from the SVG. The English guide explains setup and the PNG shows the cut and engraving layout. The download contains digital files only.

Can I make a smaller Comet Carols ornament?

The supplied outline is 98 × 73 mm and the SVG page is 108 × 83 mm. If you reduce the size, scale all paths together and check the cord hole, the taper at the tail and the legibility of the engraving on scrap.

Can I use this SVG with my CO₂ or diode laser?

Use the SVG workflow supported by your controller and confirm that your plywood, including its adhesive and thickness, is approved for the machine. Verify the imported dimensions and test cutting and engraving on scrap of the same stock.

Can I resize the ornament or sell the ones I make?

Scale the profile, hole and engraved art together. Check that your cord fits and that there is enough wood between the hole and the outer edge. You may sell the finished ornaments you make. See the README for digital-file terms.

Comet Carols Christmas Ornament SVG has received 0 reviews with an average rating of out of 5
Reviews are enabled for non customers for demo purposes