$1.20

Covenant Ark Christian Shadow Box SVG

0 reviews
  • Subtotal

    {{ currencyFormat( pricing_summary.total_amount ) }}

The ark and the rainbow

An ark beneath a rainbow

Covenant Ark is a Noah's ark shadow box SVG with a broad hull, peaked cabin and layered water. Rainbow arcs and two engraved bird marks sit above the scene.

120 × 120 mm per layerFour stacked layersSVG + English guide + assembly map

A peaked cabin above the water

Four engraved windows sit under the peaked roof, and the cabin and hull share one front silhouette. Ripples and a distant band of hills sit behind the ark. Three rainbow arcs and two birds are engraved in the open space above the cabin.

The ZIP contains digital files. Supply your own wood, finish, adhesive and display hardware.

Covenant Ark layered wood artwork displayed upright, with the ark below an engraved rainbow and two birds.
The ark sits across layered water beneath a rainbow and two engraved bird marks. Illustrative display. Digital files only.

Sizes and layer order

Covenant Ark Christian Shadow Box SVG specifications
Download 01-front.svg, 02-middle.svg, 03-background.svg, 04-backing.svg, README.txt and assembly-map.png in a ZIP
Finished footprint 120 × 120 mm per layer
SVG page size 130 × 130 mm per SVG
Front to back 01 ark and peaked cabin, 02 layered water and ripples, 03 distant hills, 04 engraved rainbow and birds on a solid backing.
Red cut paths Closed 0.025 mm centerline strokes for the outer profiles and any interior openings
Black engraving Rainbow arcs and two bird marks on the backing, with surface details on the scene layers.
Stock Uncoated plywood approved for the exact laser and operations. Nominal 3 mm plywood gives an approximately 12 mm bare stack before adhesive or finish.
SKU VD-CA-SBX

Dimensions describe the vector geometry before kerf. The thickness of the assembled piece depends on the stock and adhesive you use.

Cut and assemble the scene

  1. Import and check scale

    Extract the ZIP. Open each numbered SVG at the supplied size and compare its outer profile with the millimeter dimensions above before machining. Preview the rainbow and bird marks as engraving. Test the small gaps between rainbow arcs and the finest outline details before machining the whole scene.

  2. Assign the cuts and engraving

    Set red to through-cutting and any black fills to engraving. Where the software supports the order, run engraving first, cut the interior openings next, then release the outer profiles. Use a test coupon from the same stock to check engraving, kerf and the smallest opening before machining the panels.

  3. Dry fit and assemble

    Align the outer edges and dry fit all four layers. Add suitable adhesive at the contact areas after machining. Keep the stack flat during curing. Keep the hull and cabin joined as you place the foreground over the water and distant hills. Check that both birds and the full rainbow are visible before bonding the backing.

The geometry was verified digitally. Make a physical prototype to check cut quality, layer fit and the final display method before producing multiples.

Prepare the SVGs for your machine

Glowforge. Upload each SVG in the Glowforge app. Confirm the 120 mm cut profile, assign red to Cut and any black fills to Engrave, then check the operation order. If both cuts appear in one step, make a working copy with a different stroke color for the perimeter. Assign that color to Cut and place it last. Glowforge SVG upload · Glowforge operation order

xTool Studio or XCS. Use the software your model supports. Compare each imported cut profile with the 120 mm specification and check the SVG import DPI if the size differs. Assign red vectors to Cut and any black fills to Engrave. xTool vector import guide

Epilog. Import the SVGs into Pulse on supported models and firmware. If you use a supported vector editor and Dashboard, retain the centered 0.025 mm red strokes and confirm that the driver recognizes them as vector cuts. Route any black fills to engraving. Epilog Pulse setup guide · Epilog Dashboard vector jobs

CO₂ or diode lasers. Use the SVG workflow supported by your controller. In LightBurn, assign red to a cutting Line layer and any black fills to an engraving Fill layer. Confirm that your machine supports both the wood and the adhesive used to make the plywood. Establish settings with a test coupon and follow your manufacturer’s exhaust and supervision instructions. LightBurn SVG import · LightBurn cut modes

Common questions

What comes with the digital download?

The ZIP contains 01-front.svg, 02-middle.svg, 03-background.svg, 04-backing.svg, README.txt and assembly-map.png. Cut from the SVGs and check the order on the map. Supply stock, adhesive and any display hardware.

Are the rainbow and birds separate pieces?

The rainbow arcs and both birds are surface engravings on the solid backing. Assign the black marks to Engrave and assemble the cut scene panels in front of them.

Can I use the files with a CO₂ or diode laser?

Use the SVG workflow your controller supports and stock approved for your laser. Match the outer dimensions across layers. Test cutting, engraving and fit on matching scrap.

Can I resize the project or sell the scenes I make?

Scale all layers together. Check small details, connector widths and fit again. You may sell finished pieces you make. See the README for the digital file terms.

Covenant Ark Christian Shadow Box SVG has received 0 reviews with an average rating of out of 5
Reviews are enabled for non customers for demo purposes