$1.20

Ginger Star Christmas Ornament SVG

0 reviews
  • Subtotal

    {{ currencyFormat( pricing_summary.total_amount ) }}

A gingerbread-inspired star for the tree

An icing border around a short wish

Ginger Star is a gingerbread star ornament SVG with icing-inspired stitches and two lines of outlined lettering. Cut the rounded star from approved plywood and engrave the decoration on its face.

88 × 88 mm outlineOne-piece plywood ornamentSVG + English guide + design map

Stitched points and two lines of lettering

BAKE and A WISH fill the middle of the star. Short stitches echo the five rounded points, while scattered spice dots keep the center open around the lettering. The art has the proportions of a decorated cookie with the finish of engraved wood.

Hang the finished star among kitchen-themed decorations or tie it to a wrapped gift. Preview the fine border stitches and the smaller letters before engraving the full job.

Ginger Star plywood ornament with BAKE A WISH lettering and icing-inspired details in a Christmas display.
Ginger Star pairs an icing-inspired border with the outlined greeting BAKE A WISH. Illustrative display. Digital files only.

Size, paths and hanging hole

Ginger Star Christmas Ornament SVG specifications
Download ornament.svg, README.txt and design-map.png in a ZIP
Cut profile Rounded five-point star, 88 × 88 mm
SVG page 98 × 98 mm
Hanging hole One round 4 mm cut hole at the top
Cut paths Two closed red contours for the hanging hole and outer profile, with centered 0.025 mm strokes
Engraving Icing stitches, spice dots and original outlined BAKE A WISH lettering
Material Uncoated plywood approved for the exact laser and operation. Nominal 3 mm plywood is a starting point if the stock is approved.
SKU VD-GS-ORN

The dimensions describe the vector geometry before kerf. Leave the clearance your machine requires and allow for the thickness of the cord.

From SVG to a hanging decoration

  1. Import and check scale

    Extract the ZIP and import ornament.svg at its supplied size. Test a scrap of the same approved plywood. Check that the engraving preview keeps the small lettering distinct from the stitches and dots.

  2. Assign cut and engraving

    Assign the black fills to engraving and the red paths to cutting. Where the controller supports it, engrave first, cut the hanging hole and release the outer profile last.

  3. Fit the hanging cord

    Once the piece has cooled, remove loose residue and test your chosen cord in the hole. Choose a cord that fits the finished diameter and supports the weight of your ornament.

The geometry was verified digitally. Make a physical test piece to check settings, engraving contrast and cord fit.

Prepare the file for your machine

Glowforge. Import the SVG in the app supported by your model. Compare the cut size with the dimensions above, assign black to Engrave and red to Cut, and preview the operation order.

xTool Studio or XCS. Use the software supported by your machine and check the SVG import DPI. Verify the resulting size in millimeters. Assign black fills to Engrave and the thin red outlines to Cut.

Epilog. Use Pulse SVG import on supported models and firmware. In a vector editor and Dashboard workflow, retain the centered 0.025 mm red strokes and check that the driver recognizes them as vectors. Route the black fills to engraving.

CO₂ or diode lasers. Use an SVG workflow such as LightBurn with equipment it supports. Verify the size and that the stock and its adhesive are suitable for your wavelength. Set red to a cutting Line layer and black to an engraving Fill layer. Follow your machine’s exhaust and supervision instructions and derive settings from a scrap sample.

Common questions

What comes with the digital download?

The ZIP contains ornament.svg, README.txt and design-map.png. Cut and engrave from the SVG. The English guide explains setup and the PNG shows the cut and engraving layout. The download contains digital files only.

How large is the Ginger Star ornament?

The outer profile measures 88 × 88 mm on a 98 × 98 mm SVG page. The nominal hanging hole is 4 mm. BAKE A WISH and the icing stitches are supplied as engravings.

Can I use this SVG with my CO₂ or diode laser?

Use the SVG workflow supported by your controller and confirm that your plywood, including its adhesive and thickness, is approved for the machine. Verify the imported dimensions and test cutting and engraving on scrap of the same stock.

Can I resize the ornament or sell the ones I make?

Scale the profile, hole and engraved art together. Check that your cord fits and that there is enough wood between the hole and the outer edge. You may sell the finished ornaments you make. See the README for digital-file terms.

Ginger Star Christmas Ornament SVG has received 0 reviews with an average rating of out of 5
Reviews are enabled for non customers for demo purposes