Harvest-inspired forms. A paper rhythm to hang.
Pumpkin paper mobile SVG.
A little autumn overhead.
Harvest Halo is an original pumpkin paper mobile SVG for 3 flat paper pieces: one pumpkin silhouette, one long leaf drop and one five-point star drop. Three SVG files supply the cut contours, with an English preparation guide and reference images. Use your own paper and cord, choose the spacing and assemble the display by hand. No fixed overall height is specified.
An autumn-inspired composition.
Flat paper, arranged by hand.
Harvest Halo brings a pumpkin-inspired theme to a hanging paper display. Choose your own colours for the supplied flat pieces, then use cord and a suitable support to compose the arrangement. The digital templates provide a starting point for a display made with your own materials.
One broad pumpkin silhouette with an integral stem and three rounded rib apertures supports two separate hanging drops: one long leaf with a central vein aperture and one five-point star. The pumpkin has one top and two lower round holes. Each drop has one round hanging hole.
The images illustrate a possible finish and setting. This is a digital download; physical cards or decorations, paper, adhesive, envelopes, tools, suspension supplies and styling props are not included.
Cut paper pieces.
Your choice of arrangement.
| Included files | Three SVG cutting files, one English README and 2 reference PNGs in one ZIP archive |
|---|---|
| Pieces in one set | 3 separate flat pieces: one pumpkin silhouette, one long leaf drop and one five-point star drop |
| Actual piece sizes (W × H) | Pumpkin: 100 × 104 mm; Leaf drop: 30 × 54 mm; Star drop: 30 × 30 mm; nominal before kerf and handling |
| SVG document pages | 01-pumpkin-cut.svg: 112 × 116 mm; 02-leaf-drop-cut.svg: 42 × 66 mm; 03-star-drop-cut.svg: 42 × 42 mm; 6 mm page margins |
| Cut operations | 12 red (#FF0000) closed cut contours per complete set; centered 0.025 mm strokes, no fill |
| Hanging and suspension holes | Five 3 mm nominal suspension holes per set: one in the pumpkin stem and two near its lower edge, plus one at the top of each drop |
| Construction | Flat cut silhouettes; no folded sculpture, interlocking joinery, scoring or engraving |
| File use | Cut each of the three SVGs once to make one pumpkin, one separate leaf drop and one separate star drop. The pumpkin and its stem form one connected flat piece; no three-dimensional pumpkin construction is supplied. |
| Design details | One broad pumpkin silhouette with an integral stem and three rounded rib apertures supports two separate hanging drops: one long leaf with a central vein aperture and one five-point star. The pumpkin has one top and two lower round holes. Each drop has one round hanging hole. |
| Arrangement and size | A pumpkin silhouette suspended above a separate leaf drop and star drop. Overall height, cord lengths, spacing and supports are chosen by the maker |
| Material planning | Plain, uncoated paper or cardstock approved for the exact machine and wavelength, with enough strength for the intended hanging display |
| Supplies to provide | Paper, suitable thin cord, tools and your own display support; none is supplied |
| Product type | Digital download only; physical decorations, paper, cord, adhesive, hardware and styling props are not included |
| Product code | VD-HH-PM |
Prepare the pieces.
Compose an autumn display.
-
Check the files and dimensions
Cut each of the three SVGs once to make one pumpkin, one separate leaf drop and one separate star drop. The pumpkin and its stem form one connected flat piece; no three-dimensional pumpkin construction is supplied. Check each actual piece size after import: Pumpkin: 100 × 104 mm; Leaf drop: 30 × 54 mm; Star drop: 30 × 30 mm. The document pages include margins. Preserve the common scale if you want the illustrated proportions.
-
Cut and release each piece
Map all 12 red contours to vector Cut, then preview the job. There are no score or engraving operations. Cut internal openings before releasing outer silhouettes where your software permits. Test the approved stock first and remove waste carefully without pulling narrow sections.
-
Arrange, tie and inspect
Suspend the pumpkin from its top stem hole. Tie separate maker-supplied cords to the lower left and right holes. Join one cord to the leaf-drop top hole and the other to the star-drop top hole. Adjust lengths, balance and support for your chosen display. No fixed finished display height is specified. The illustrated arrangement places the leaf on the left and the star on the right. Dry-arrange the complete display before installation. Select cord that passes through the holes without forcing or tearing them, and inspect your own knots, hole margins and display support.
This design has not been physically test-cut, assembled, strength-tested or mounting-tested. Paper, grain direction, kerf, cord tension and display support affect the result. Make a complete prototype and inspect your own suspension arrangement before gifting, selling or installation.
Before the display.
Clear making answers.
What is included with this pumpkin paper mobile SVG?
The ZIP includes 01-pumpkin-cut.svg, 02-leaf-drop-cut.svg, 03-star-drop-cut.svg, README.txt, cut-map.png, assembled-reference.png. Cut each of the three SVGs once to make one pumpkin, one separate leaf drop and one separate star drop. The pumpkin and its stem form one connected flat piece; no three-dimensional pumpkin construction is supplied. The PNGs explain dimensions and a possible arrangement; they are visual references, not machining files.
How are the paper pieces arranged?
Suspend the pumpkin from its top stem hole. Tie separate maker-supplied cords to the lower left and right holes. Join one cord to the leaf-drop top hole and the other to the star-drop top hole. Adjust lengths, balance and support for your chosen display. No fixed finished display height is specified. The illustrated arrangement places the leaf on the left and the star on the right. The layout is an illustrative option, rather than a fitted construction or a guarantee of display strength.
Are cord and mounting materials included?
Five 3 mm nominal suspension holes per set: one in the pumpkin stem and two near its lower edge, plus one at the top of each drop. Provide your own suitable thin cord and display support. Check that the cord fits without force and that the paper holds the chosen arrangement. No cord, support bar, mounting hardware or finished display is supplied, and no load rating is specified.
Can I resize or repeat the motifs?
Yes. Keep related pieces at the same proportional scale to preserve the illustrated balance, and recheck every opening, narrow section and cord hole. The supplied sizes are Pumpkin: 100 × 104 mm; Leaf drop: 30 × 54 mm; Star drop: 30 × 30 mm. Changing scale also changes hole sizes and paper strength. Make a fresh prototype after resizing or changing the suspension arrangement.
How do I prepare the SVGs for Glowforge, xTool, Epilog or another laser?
Glowforge: Upload the SVG, check the actual cut dimensions and assign red contours to Cut.
xTool Studio/XCS: Import through software supported by your model. SVG import DPI can affect scale; verify dimensions and assign operations manually.
Epilog: Open the vectors in suitable graphics software. Preserve centered 0.025 mm strokes and output through the driver or Dashboard supported by your model.
Other CO₂/diode systems: For compatible controllers, LightBurn imports SVG. Verify vector operations, usable work area and stock approval for your actual machine and wavelength.
Which paper and settings should I use?
Use plain, uncoated paper or cardstock approved for your exact machine, wavelength and paper-holding method. Confirm unknown coatings, dyes and adhesives before processing. A CO₂-compatible stock is not automatically suitable for a diode laser. Follow the machine maker’s extraction and supervision instructions, and test your own stock. No universal weight, thickness, power, speed or pass count is supplied. The design has not been physically test-cut, assembled, strength-tested or mounting-tested.
Can I sell the paper decorations I make?
Yes. Personal use and sales of finished physical decorations you make are permitted. Do not resell, share, give away or redistribute the digital files, modified digital files or digital parts. Read the included guide for the usage terms. Paper pieces and hanging cords are decorative display materials; use your own suitable installation and keep them away from heat sources.