$1.20

Holly Arch Christmas Earrings SVG

0 reviews
  • Subtotal

    {{ currencyFormat( pricing_summary.total_amount ) }}

Open arch drops with engraved holly

Art Deco arches with a sprig of holly

Holly Arch is a Christmas holly earrings SVG for a matched pair of plywood drops. Each piece combines an open Art Deco arch with engraved leaves and three berry dots. Fit the drops to your own earring hardware after cutting.

24 × 38 mm per drop outlineOne layer of plywoodSVG + English guide + design map

A cutout arch with fine details around it

The tall inner opening gives the arch its shape and lets the background show through. Holly leaves follow the lower area of each drop, where the berry dots finish the engraving. The two pieces share the same silhouette.

Images illustrate a possible finished appearance. The download contains digital files. Supply your own stock, hardware and finishing materials.

Holly Arch earrings with open arches and engraved holly in a Christmas jewelry display.
Holly leaves and three berry dots decorate each open arch. Illustrative display. Digital files only.

Size, cut paths and mounting

Holly Arch Christmas Earrings SVG specifications
Download design.svg, README.txt and design-map.png in a ZIP
Cut profile Matched pair of Art Deco arch drops, 24 × 38 mm per drop
SVG page 68 × 48 mm
Hardware holes One 2 mm round upper cut hole per drop
Red cut paths Six closed red contours for two outer profiles, two inner arches and two hardware holes. Centered 0.025 mm strokes.
Black engraving Holly leaves and three berry dots on each drop
Material One layer of uncoated plywood approved for the exact machine and operations. Nominal 2–3 mm stock is a prototype starting point where supported.
SKU VD-HA-EAR

Dimensions describe the vector geometry before kerf. The finished hole diameter and remaining material depend on stock and machine settings.

Cut, engrave and fit the hardware

  1. Import and check scale

    Extract the ZIP and import design.svg at its supplied size. Preview both arch openings and both hardware holes as interior cuts. Inspect the width of the wood beside the arches and check that all three berries read clearly in a scrap engraving.

  2. Assign each operation

    Set the black fills to engraving and the red paths to through-cutting. Where your software supports it, engrave first, cut the holes and any inner openings next, then release the outer profiles.

  3. Check the finished fit

    The upper holes take your choice of compatible jump rings and earring hooks. Check the ring diameter and movement on a finished sample. Fit the hardware after machining and any finishing.

The geometry was verified digitally. Make a physical prototype to check cutting, engraving contrast, material strength and hardware fit before producing multiples.

Prepare the SVG for your laser

Glowforge. Import the SVG in the app supported by your model. Verify the cut size, set black to Engrave and red to Cut, and preview the operation order.

xTool Studio or XCS. Use the software your machine supports and check the SVG import DPI. Confirm the size in millimeters. Assign the black fills to Engrave and the red vectors to Cut.

Epilog. Use Pulse SVG import on supported models and firmware. In a vector editor and Dashboard workflow, retain the centered 0.025 mm red strokes and confirm that they register as vectors. Route black fills to engraving.

CO₂ or diode lasers. Use an SVG workflow such as LightBurn with supported equipment. Use a cutting Line layer for red and an engraving Fill layer for black. Confirm the selected stock is suitable for your wavelength and test on scrap of the same material. Follow your machine’s exhaust and supervision instructions.

Common questions

What comes with the digital download?

The ZIP contains design.svg, README.txt and design-map.png. Use the SVG for machining. The PNG explains the operation colors and the English guide covers setup and fit. Supply your own wood and hardware.

Which parts of Holly Arch cut through?

The outer shape, inner arch and nominal 2 mm upper hole cut through on each drop. The holly leaves and berry dots engrave on the face. Each drop measures 24 × 38 mm.

Can I use the file with a CO₂ or diode laser?

Use the SVG workflow supported by your controller. Check that the machine manufacturer approves your plywood, including its glue and thickness. Verify the imported size and test both operations on matching scrap.

Can I resize the design or sell the pieces I make?

Scale all cut and engraving paths together and check the hardware fit and remaining wood around the holes. You may sell finished physical pieces you make. See the README for the digital-file terms.

Holly Arch Christmas Earrings SVG has received 0 reviews with an average rating of out of 5
Reviews are enabled for non customers for demo purposes