A Christmas greeting by lantern light
A lantern and one word for Christmas
Noël Lantern is a Noël Christmas sign SVG for a single plywood plaque. The lantern and evergreen set the scene for NOËL, a short greeting that works well on an entry wall or as part of an indoor winter display.
Room for a word and its accent
Wide serif capitals carry NOËL across the lower half of the plaque. The two dots over Ë are part of the outlined engraving. Above the word, evergreen crosses the foot of a lantern with a flame silhouette. The inset border repeats the domed top and keeps the illustration and lettering together.
Give the plaque a little clear space in an entry display so the lantern and the accent remain easy to read. Its upright proportions work alongside seasonal greenery and folded textiles.

Size, paths and mounting
| Digital files | sign.svg, README.txt and design-map.png in a ZIP |
|---|---|
| Cut profile | Upright plaque with a domed top, 150 × 175 mm at the supplied scale |
| SVG page | 160 × 185 mm |
| Mounting | Two round cut holes, each 5 mm in diameter at the supplied scale. Choose your own cord or hardware. |
| Red CUT | Three closed contours with centered 0.025 mm strokes. Two holes and one outer profile. |
| Black ENGRAVE | Filled artwork, inset border and outlined lettering for area engraving. |
| SKU | VD-NL-SIGN |
Dimensions describe the vector geometry before kerf. Allow the machine’s required clearance.
Set up the plaque
-
Confirm scale and stock
Extract the ZIP and import sign.svg at the supplied scale. Confirm the 175 mm outline height after import and inspect the dots over Ë as part of the engraving preview. Use uncoated plywood approved for your laser, including its glue and actual thickness. Test engraving, cutting and kerf on matching scrap.
-
Set each operation
Assign black fills to engraving and red paths to through-cutting. Where supported, engrave first, cut the holes next and release the outer profile last. Follow manufacturer instructions for exhaust, stock support and supervision.
-
Check the finished fit
Make a complete prototype and measure the holes. Select cord or fasteners to suit the finished weight and mounting surface. Fit hardware after processing.
The vector geometry was checked digitally. Test a physical sample on your machine. Develop settings for your equipment and plywood. The file includes no universal laser preset.
Import and prepare the SVG
Glowforge. Upload the SVG in the app supported by your model. Check the size, set red to Cut and set black to Engrave.
xTool Studio or XCS. Use the version supported by your machine. Check scale after SVG import, since import DPI can affect dimensions. Assign the closed red profiles to Cut and the filled black shapes to Engrave.
Epilog. Use Pulse SVG import on supported models and firmware. On a vector editor and Dashboard workflow, preserve the centered 0.025 mm strokes and check that the driver recognizes them as vector cuts. Keep black fills on the engraving process.
Other CO₂ or diode lasers. Check machine support for the plywood and its thickness. In supported software such as LightBurn, verify the millimeter dimensions and set red to a cutting Line layer and black to an engraving Fill layer. Preview the job and confirm the planned order.
Common questions
What is included in the download?
The ZIP contains sign.svg, README.txt and design-map.png. Process the SVG. The English guide explains setup and use, and the PNG shows the layout for reference. The download contains digital files only.
How large is the Noël plaque, and is the Ë included?
The plaque is 150 × 175 mm on a 160 × 185 mm SVG page. NOËL is supplied as outlined artwork, including the two dots above Ë. Set the letters and the lantern and evergreen motifs to engrave.
Can I use this file on Glowforge, xTool or Epilog?
Yes, through the supported import workflows above. For CO₂ or diode setups, check usable bed space and approved plywood thickness. Verify size and operation assignments before processing.
Can I resize it or sell finished signs?
Scale every path together and recheck engraving detail, hole diameter and edge clearance. You may sell finished signs you make. Keep the original and modified digital files for your own use. See the README for terms.