$1.20

Olivewing Peace Christian Layered Art SVG

0 reviews
  • Subtotal

    {{ currencyFormat( pricing_summary.total_amount ) }}

The olive branch

A dove above the words Peace Takes Root

Olivewing Peace is a Christian dove layered art SVG with a right-facing dove on an olive branch. The original two-line PEACE TAKES ROOT lettering is supplied as filled vector outlines for engraving.

120 × 120 mm per layerFour stacked layersSVG + English guide + assembly map

Two lines of lettering under the branch

PEACE sits above TAKES ROOT on the foreground plaque. A dove with raised wings stands on the olive branch one layer deeper, with distant landscape forms and engraved light behind. The lettering is drawn specifically for the plaque.

The ZIP contains digital files. Supply your own wood, finish, adhesive and display hardware.

Olivewing Peace layered wood artwork displayed upright, with an olive branch, a dove and PEACE TAKES ROOT lettering.
The dove rests on an olive branch above the two-line PEACE TAKES ROOT plaque. Illustrative display. Digital files only.

Sizes and layer order

Olivewing Peace Christian Layered Art SVG specifications
Download 01-front.svg, 02-middle.svg, 03-background.svg, 04-backing.svg, README.txt and assembly-map.png in a ZIP
Finished footprint 120 × 120 mm per layer
SVG page size 130 × 130 mm per SVG
Front to back 01 PEACE / TAKES ROOT plaque, 02 dove and connected olive branch, 03 landscape flanks, 04 engraved light on a solid backing.
Red cut paths Closed 0.025 mm centerline strokes for the outer profiles and any interior openings
Black engraving Original PEACE / TAKES ROOT lettering in filled paths and surface details marked on the layer maps.
Stock Uncoated plywood approved for the exact laser and operations. Nominal 3 mm plywood gives an approximately 12 mm bare stack before adhesive or finish.
SKU VD-OP-LAY

Dimensions describe the vector geometry before kerf. The thickness of the assembled piece depends on the stock and adhesive you use.

Cut and assemble the scene

  1. Import and check scale

    Extract the ZIP. Open each numbered SVG at the supplied size and compare its outer profile with the millimeter dimensions above before machining. Preview both rows as black fill engraving. Use a matching test coupon for the narrow strokes and spacing before engraving the full plaque.

  2. Assign the cuts and engraving

    Set red to through-cutting and any black fills to engraving. Where the software supports the order, run engraving first, cut the interior openings next, then release the outer profiles. Use a test coupon from the same stock to check engraving, kerf and the smallest opening before machining the panels.

  3. Dry fit and assemble

    Align the outer edges and dry fit all four layers. Add suitable adhesive at the contact areas after machining. Keep the stack flat during curing. Set the lettering panel over the dove. Look directly at the stack to check that the branch and both rows of lettering stay visible before bonding.

The geometry was verified digitally. Make a physical prototype to check cut quality, layer fit and the final display method before producing multiples.

Prepare the SVGs for your machine

Glowforge. Upload each SVG in the Glowforge app. Confirm the 120 mm cut profile, assign red to Cut and any black fills to Engrave, then check the operation order. If both cuts appear in one step, make a working copy with a different stroke color for the perimeter. Assign that color to Cut and place it last. Glowforge SVG upload · Glowforge operation order

xTool Studio or XCS. Use the software your model supports. Compare each imported cut profile with the 120 mm specification and check the SVG import DPI if the size differs. Assign red vectors to Cut and any black fills to Engrave. xTool vector import guide

Epilog. Import the SVGs into Pulse on supported models and firmware. If you use a supported vector editor and Dashboard, retain the centered 0.025 mm red strokes and confirm that the driver recognizes them as vector cuts. Route any black fills to engraving. Epilog Pulse setup guide · Epilog Dashboard vector jobs

CO₂ or diode lasers. Use the SVG workflow supported by your controller. In LightBurn, assign red to a cutting Line layer and any black fills to an engraving Fill layer. Confirm that your machine supports both the wood and the adhesive used to make the plywood. Establish settings with a test coupon and follow your manufacturer’s exhaust and supervision instructions. LightBurn SVG import · LightBurn cut modes

Common questions

What comes with the digital download?

The ZIP contains 01-front.svg, 02-middle.svg, 03-background.svg, 04-backing.svg, README.txt and assembly-map.png. Cut from the SVGs and check the order on the map. Supply stock, adhesive and any display hardware.

Do I need to install a font for PEACE TAKES ROOT?

The lettering is drawn as filled vector outlines. Assign the black letters to Engrave. Preview PEACE above TAKES ROOT at the supplied size and test the smallest letter gaps on matching scrap.

Can I use the files with a CO₂ or diode laser?

Use the SVG workflow your controller supports and stock approved for your laser. Match the outer dimensions across layers. Test cutting, engraving and fit on matching scrap.

Can I resize the project or sell the scenes I make?

Scale all layers together. Check small details, connector widths and fit again. You may sell finished pieces you make. See the README for the digital file terms.

Olivewing Peace Christian Layered Art SVG has received 0 reviews with an average rating of out of 5
Reviews are enabled for non customers for demo purposes