A reading shelf
Read Slow, Grow Deep
Open Leaves is a Christian scripture sign SVG with an open Bible, a sprout and the original words READ SLOW GROW DEEP. The broad arch suits a reading shelf or study desk when paired with a holder you provide.
A sprout above the open book
The sprout rises from the fold between the open pages. Below the book, READ SLOW sits over GROW DEEP in two engraved lines. The book and lettering share a single panel.
The ZIP contains digital files. Supply your own wood, finish and display hardware.

Size and operations
| Download | design.svg, README.txt and design-map.png in a ZIP |
|---|---|
| Cut footprint | 164 × 146 mm |
| SVG page | 174 × 156 mm |
| Profile | Broad arch plaque |
| Display mounting | Display in a holder of your choice. The panel has a continuous outer cut profile. |
| Red cut paths | One closed outer profile with a centered 0.025 mm cut stroke. |
| Black engraving | Open Bible and sprout motif with filled READ SLOW / GROW DEEP outlines. |
| Stock | Use uncoated plywood approved for the exact laser and operation. Use nominal 3 mm stock where your machine and the material allow it. |
| SKU | VD-OL-SGN |
Dimensions refer to the vector geometry before kerf. Keep any required clearance around the profile on your usable laser bed.
From the SVG to the finished sign
-
Import and confirm size
Extract the ZIP and open design.svg at its supplied scale. Confirm an outline 164 mm wide. Preview the book pages and the narrow letter spaces on a sample at the supplied scale.
-
Assign the operations
Assign red centerlines to through-cutting and black filled shapes to engraving. Engrave first, cut any interior openings next and release the outer profile last when your software supports that order. Test kerf, detail and cut depth on a coupon from the same stock.
-
Check the display fit
Choose a holder that accommodates the measured stock thickness and cradles the plaque without covering the lettering. Check balance on a flat surface.
The vector geometry was checked digitally. Cut a physical prototype to confirm your settings, the small details and the display fit before producing multiples.
Prepare the file for your machine
Glowforge. Upload the SVG and confirm its outline size. Assign red to Cut and black fills to Engrave. If interior and perimeter cuts appear in one step, give the perimeter a separate stroke color in a working copy and place that Cut step last. Glowforge SVG upload · Glowforge operation order
xTool Studio or XCS. Use the software supported by your model. Confirm the outline in millimeters and check the SVG import DPI if the size differs. Set red vectors to Cut and black fills to Engrave. xTool vector import guide
Epilog. Open the SVG with Pulse on supported models and firmware. In a supported vector editor and Dashboard workflow, retain the centered 0.025 mm cut strokes and confirm that the driver reads them as vector cuts. Route the black fills to engraving. Epilog Pulse setup guide · Epilog Dashboard vector jobs
CO₂ or diode lasers. Use software that supports SVG and your controller. In LightBurn, use Line mode for cutting and Fill mode for engraving. Verify your machine supports the plywood and its adhesive, test on matching stock and follow the manufacturer’s exhaust and supervision instructions. LightBurn SVG import · LightBurn cut modes
Common questions
What comes with the digital download?
The ZIP contains design.svg, README.txt and design-map.png. Process the SVG and use the guide and design map to check the operation assignments. Supply your own wood and display hardware.
How is Open Leaves displayed?
The plaque measures 164 × 146 mm at the supplied scale. It is designed for a display holder you provide. Choose a holder that fits your finished thickness and leaves the original text clear.
Can I use this SVG with a CO₂ or diode laser?
Use SVG-capable software that supports your controller. Check the plywood's thickness and adhesive against your machine's material guidance. Compare the profile with your usable bed and test the cut and engraving on matching scrap.
Can I resize the design or sell finished pieces?
Scale all vectors together. Recheck detail size, any mounting clearance and the strength of the narrowest connections. You may sell finished physical pieces you make. See the README for the digital file terms.