$1.20

Threshold Grace Christian Welcome Sign SVG

0 reviews
  • Subtotal

    {{ currencyFormat( pricing_summary.total_amount ) }}

At the door

Grace at This Door

Threshold Grace is a Christian welcome sign SVG with GRACE AT THIS DOOR in two original engraved lines. A house and key motif places the greeting at the threshold.

180 × 112 mm outlineOne-piece wood designSVG + English guide + design map

A house and key on a wide panel

A roofline shelters a small key below the two-line greeting. The inset border echoes the clipped corners of the landscape profile, a broad shape suited to an indoor entry or hallway.

The ZIP contains digital files. Supply your own wood, finish and display hardware.

Threshold Grace wooden plaque in an entry display, showing GRACE AT THIS DOOR and the house and key motif.
GRACE AT THIS DOOR and a house and key motif mark the entry plaque. Illustrative display. Digital files only.

Size and operations

Threshold Grace Christian Welcome Sign SVG specifications
Download design.svg, README.txt and design-map.png in a ZIP
Cut footprint 180 × 112 mm
SVG page 190 × 122 mm
Profile Landscape panel with softly clipped corners
Display mounting Two Ø5 mm holes, 144 mm apart on center and 20 mm below the top of the outline. Supply your own cord or hardware.
Red cut paths One closed outer profile and two mounting holes, all with centered 0.025 mm strokes.
Black engraving Outlined lettering and the house and key motif for area engraving.
Stock Use uncoated plywood approved for the exact laser and operation. Use nominal 3 mm stock where your machine and the material allow it.
SKU VD-TG-SGN

Dimensions refer to the vector geometry before kerf. Keep any required clearance around the profile on your usable laser bed.

From the SVG to the finished sign

  1. Import and confirm size

    Extract the ZIP and open design.svg at its supplied scale. Confirm an outline 180 mm wide. Keep both holes, all engraving and the outer profile aligned if you rotate the artwork on your usable bed.

  2. Assign the operations

    Assign red centerlines to through-cutting and black filled shapes to engraving. Engrave first, cut any interior openings next and release the outer profile last when your software supports that order. Test kerf, detail and cut depth on a coupon from the same stock.

  3. Check the display fit

    Check the mounting points on the finished plaque before choosing cord or fasteners. Use a dry, protected mounting surface and hardware rated for the sign.

The vector geometry was checked digitally. Cut a physical prototype to confirm your settings, the small details and the display fit before producing multiples.

Prepare the file for your machine

Glowforge. Upload the SVG and confirm its outline size. Assign red to Cut and black fills to Engrave. If interior and perimeter cuts appear in one step, give the perimeter a separate stroke color in a working copy and place that Cut step last. Glowforge SVG upload · Glowforge operation order

xTool Studio or XCS. Use the software supported by your model. Confirm the outline in millimeters and check the SVG import DPI if the size differs. Set red vectors to Cut and black fills to Engrave. xTool vector import guide

Epilog. Open the SVG with Pulse on supported models and firmware. In a supported vector editor and Dashboard workflow, retain the centered 0.025 mm cut strokes and confirm that the driver reads them as vector cuts. Route the black fills to engraving. Epilog Pulse setup guide · Epilog Dashboard vector jobs

CO₂ or diode lasers. Use software that supports SVG and your controller. In LightBurn, use Line mode for cutting and Fill mode for engraving. Verify your machine supports the plywood and its adhesive, test on matching stock and follow the manufacturer’s exhaust and supervision instructions. LightBurn SVG import · LightBurn cut modes

Common questions

What comes with the digital download?

The ZIP contains design.svg, README.txt and design-map.png. Process the SVG and use the guide and design map to check the operation assignments. Supply your own wood and display hardware.

What is the spacing between the welcome sign holes?

The two 5 mm holes are 144 mm apart on center at the supplied size. Each center is 20 mm below the top of the outline. Check the finished holes before cutting cord or placing fasteners.

Can I use this SVG with a CO₂ or diode laser?

Use SVG-capable software that supports your controller. Check the plywood's thickness and adhesive against your machine's material guidance. Compare the profile with your usable bed and test the cut and engraving on matching scrap.

Can I resize the design or sell finished pieces?

Scale all vectors together. Recheck detail size, any mounting clearance and the strength of the narrowest connections. You may sell finished physical pieces you make. See the README for the digital file terms.

Threshold Grace Christian Welcome Sign SVG has received 0 reviews with an average rating of out of 5
Reviews are enabled for non customers for demo purposes