A sleigh between snow-covered slopes
A wooden sleigh under a crescent moon
Twilight Sleigh is a Christmas sleigh layered art SVG for a panel in four layers. The sleigh sits on a swept ribbon of snow behind the near hill, with pines, a crescent moon and stars farther back.
A near hill in front of the sleigh
The low foreground hill leaves the sleigh in view across the center. The snow below the sleigh sweeps toward the pine-covered ridge. A crescent, stars and snow dots on the backing fill the space above the hillside.
The ZIP contains digital files. Supply your own wood, finish, adhesive and display hardware.

Sizes and layer order
| Download | 01-front.svg, 02-middle.svg, 03-background.svg, 04-backing.svg, README.txt and assembly-map.png in a ZIP |
|---|---|
| Finished footprint | 120 × 120 mm per layer |
| SVG page size | 130 × 130 mm per SVG |
| Front to back | Near hill → sleigh and swept snow → pines and hillside → solid backing with crescent, stars and snow dots |
| Red cut paths | Closed 0.025 mm centerline strokes for the outer profiles and any interior openings |
| Black engraving | Black filled surface marks including the crescent, stars and snow dots on the solid backing |
| Stock | Uncoated plywood approved for the exact laser and operations. Nominal 3 mm plywood gives an approximately 12 mm bare stack before adhesive or finish. |
| SKU | VD-TS-LAY |
Dimensions describe the vector geometry before kerf. The thickness of the assembled piece depends on the stock and adhesive you use.
Cut and assemble the scene
-
Import and check scale
Extract the ZIP. Open each numbered SVG at the supplied size and compare its outer profile with the millimeter dimensions above before machining. Check that the runner and sweep of snow retain their smaller connections in the cutting preview. Confirm that the moon and stars are set to engraving.
-
Assign the cuts and engraving
Set red to through-cutting and any black fills to engraving. Where the software supports the order, run engraving first, cut the interior openings next, then release the outer profiles. Check the planned operations on scrap first.
-
Dry fit and assemble
Align the outer edges and dry fit all four layers. Add suitable adhesive at the contact areas after machining. Keep the stack flat during curing. Line up the two snow layers with the sleigh behind the near hill. Make sure the trees are behind the sleigh and the moon remains visible above the ridge. Choose a display support after measuring the assembled depth.
The geometry was verified digitally. Make a physical prototype to check cut quality, layer fit and the final display method before producing multiples.
Prepare the SVGs for your machine
Glowforge. Import each SVG in the app supported by your model. Verify the size, set red to Cut and black fills to Engrave where present, and preview the operation order.
xTool Studio or XCS. Use the software your machine supports and check the SVG import DPI. Verify the size in millimeters for each numbered layer. Assign red vectors to Cut and any black fills to Engrave.
Epilog. Use Pulse SVG import on supported models and firmware. In a vector editor and Dashboard workflow, retain centered 0.025 mm red strokes and confirm that they register as vectors. Route any black fills to engraving.
CO₂ or diode lasers. Use an SVG workflow such as LightBurn with equipment it supports. Assign red to a cutting Line layer and any black fills to an engraving Fill layer. Confirm that the stock and any glue in the plywood suit the wavelength and equipment. Use matching scrap to establish settings and follow your manufacturer’s exhaust and supervision instructions.
Common questions
What comes with the digital download?
The ZIP contains 01-front.svg, 02-middle.svg, 03-background.svg, 04-backing.svg, README.txt and assembly-map.png. Cut from the SVGs and check the order on the map. Supply stock, adhesive and any display hardware.
Does Twilight Sleigh include a support or frame?
The download includes the four scene layers, an English README and the assembly map. Supply a stand or frame separately if your display needs one. A bare stack assembled from nominal 3 mm stock is approximately 12 mm deep before adhesive or finish.
Can I use the files with a CO₂ or diode laser?
Use the SVG workflow your controller supports and stock approved for your laser. Match the outer dimensions across layers. Test cutting, engraving and fit on matching scrap.
Can I resize the project or sell the scenes I make?
Scale all layers together. Check small details, connector widths and fit again. You may sell finished pieces you make. See the README for the digital file terms.